what cams and valvetrain are you running on your SR20

[S14DOOD]

Ok so im wanting to know what cams and valvetrain people are running on there SR20. Give me reasons why you are running this setup.

[Pinggg]

Bc cam gears
Bc 272 stage 3 intake/exhaust cam
Bc intake/exhaust Valves
Bc Ti retainers
Bc Valve springs

[S14DOOD]

What tune and trubo are u running? Havew u had any problems with the TI retainers, ive heard that they wear out real quick.

[Quicksilver_s13]

HKS stage 2 272ex/264in cams, HKS valve springs, BC titanium retainers and stainless valves, greddy rocker arm stoppers. rev limit 8,000rpm, power fc d jetro, precision 5857 bb turbo - 525hp/424tq 1.9bar turbo spools hits full boost at 4700rpm

[boost addict]

Bc 264's, springs and retainers with tomei roker arm stoppers

[slow_sr20]

HKS 264 step 1's
Crower titanium retainers
Peak GOLD valve springs
Greddy rocker arm stoppers

S15 t28, 550's on nistune. Cams sound cool:naughty:

[S14DOOD]

Im going to run Tomei 260's
supertech valve springs
supertech stainless retainers
greddy RAS

T28 and plan on getting 550's and nistune

[fliprayzin240sx]

Tomei 260s procams on stock T28? Pretty pointless since itll hurt you more than help you.

[S14DOOD]

well the t28 is just temp until i have the money for something else my engine is not built yet so by the time it gets done i should have another turbo. What turbo would u recomend?

[Zerolift Autolab]

S13 SR20det - Pistons, Rods, Bearings Build...

HKS Step 2 264/272
HKS Cam Gears
Supertech Dual Valve Springs and Retainers
Tomei Rocker Stoppers

Using a GT30R Family Turbo.
The cam choice allows for a progressive power band without having a drastic Peak when the peak power comes in, also holds the power band longer with the staggered duration cams.

[Darren]

S13 SR20det - Pistons, Rods, Bearings Build...

HKS Step 2 264/272
HKS Cam Gears
Supertech Dual Valve Springs and Retainers
Tomei Rocker Stoppers

Using a GT30R Family Turbo.
The cam choice allows for a progressive power band without having a drastic Peak when the peak power comes in, also holds the power band longer with the staggered duration cams.

Well thought out and explained... Does it perform as you thought it would?

I am interested, and i'm sure OP would be...

[mattsil80wis]

The cam should be dependent on what turbo you are going to use

my set up

gt2871r .64
Greddy rocker arm stoppers
JWT S3 cams
everything else is stock

great cams nice power from 3700ish-redline (7850)

[AdrenalineS14]

Bc 264's, springs and retainers with tomei roker arm stoppers

me too, what kind of power are ya pushing?:p

[boost addict]

im on a 3076r, thinking 20ish psi, and going e85. havent got it tuned yet though. whats your setup

[onehundredoctane]

Brian Crower 272's mainly because they should make high end power, but I bolted on a Garrett GT3071R twinscroll because it should spool up around 2,500-3,000 rpm, making a great power band with that cam. I also have Brian Crower intake and exhaust cams, springs and retainers. I'm still putting the car together so don't ask for hp/tq figures yet :)

[AdrenalineS14]

im on a 3076r, thinking 20ish psi, and going e85. havent got it tuned yet though. whats your setup

top and bottom built... im running a crappy power enterprise PE1420 at 15psi just dyno tuned it on the power fc and making 306 to the wheels... this turbo is really holding me back :(

[idahotuner]

BC springs
stock retainers
BC 264 cams

[S14DOOD]

I plan on doing a 3076R as soon as i get the money to afford it.
Im in the process of building my engine now.
Im going with a s14sr with CP 86.5 9:0.1 pistons, eagle rods, clevite bearings, ARP head studs, cosworth head gasket.
Im hoping to put down good power but its gonna be a while before its done.