PDA

View Full Version : CA S13 Hatchback Parting Out


c16clothing
09-26-2011, 08:19 PM
We needed some parts off this car for a race car we are building but now it's time to part out.

Currently no engine/transmission/differential/windshield/side windows. Everything else in these pictures is still available.

Car is located in Ontario, California right at the 60/15. I will part with the shell+whatever is on it as well. Just make an offer.

http://farm7.static.flickr.com/6179/6182740097_7ab0120cdd_z.jpg

http://farm7.static.flickr.com/6180/6183262840_d3fde03c43_z.jpg

http://farm7.static.flickr.com/6163/6182755299_d29daef754_z.jpg

http://farm7.static.flickr.com/6180/6182795301_3a1c63735c_z.jpg

Fulll Car Photo Gallery:
http://www.flickr.com/photos/67931683@N02/sets/72157627752563480/with/6182795301/

deeweezy
09-26-2011, 08:51 PM
would u ship fenders? to 70560

shinjitsu
09-26-2011, 10:14 PM
pm'd you about the fender liner

s13_rb25
09-26-2011, 10:16 PM
i cant tell... does it have a sunroof?

Rhdmike
09-26-2011, 10:24 PM
I want door panels how much shipped to 32812

c16clothing
09-26-2011, 11:12 PM
i cant tell... does it have a sunroof?



No sunroof on this car.

milto0n
09-26-2011, 11:50 PM
Edit: Nevermind didn't realize it was SOHC

victo.
09-26-2011, 11:59 PM
How much for the whole front bumper with lights?

1slicktwo4oh
09-26-2011, 11:59 PM
door panels and interior plastics...available?how much P/U

s13_ricky
09-27-2011, 12:50 AM
Climate control and the radio trim still around? Price for pickup?

c16clothing
09-27-2011, 03:06 AM
All PM's replied to. Thanks for all the interest guys. Going to bed but will reply tomorrow to everyone.

Slammed Assassin
09-27-2011, 03:32 AM
how much for the battery?

1990 s13
09-27-2011, 07:34 AM
ontario california? im in fontana ill pick up the driver side fender plz =] pm with a number so we can get this going

CristianJ
09-27-2011, 08:47 AM
How much do you want for the a/c line that goes into the evaporater shipped to 55107?

s13 4rey
09-27-2011, 10:18 AM
ill take driver pop up light.949-566-4260 shipped to 92683

sr20detS15
09-27-2011, 11:17 AM
how much for the door panels and the dashboard if it in a good condition?

ov1989
09-27-2011, 01:04 PM
does dash have cracks willing to pick up asap?

Paper_Tiger240
09-27-2011, 01:49 PM
price for the front bumper only

k0uki
09-27-2011, 05:58 PM
headlight switch shipped to 95121?

sil80junkie
09-27-2011, 05:59 PM
does it have a 5 speed tranny harness and how much would it be

Silviaracer1988
09-27-2011, 09:26 PM
outside door handles with locks and key shipped to 15205

XiaoAZN
09-27-2011, 10:01 PM
Hatch interior pieces shipped to 98033? Need the carpet covered pieces inside the hatch area (covers the strut towers / tail lights / etc)

c16clothing
09-27-2011, 10:55 PM
Since so many people have asked the dash has some big cracks in it. The rest of the interior is pretty decent.

Eyegazm
09-28-2011, 11:03 AM
how much for the passenger headlight cover shipped 66801

Fonix36
09-28-2011, 12:49 PM
pm me if you want to get rid of the shell

c16clothing
09-28-2011, 06:05 PM
pm me if you want to get rid of the shell



PM sent. The shell with whatever is left is up for grabs for anyone interested.

jeffwiggins
09-28-2011, 09:17 PM
if you have the front lower control arms let me know i am close by and if u can give me a good price ill pick up ASAP!!!!

holslut s13
09-28-2011, 10:08 PM
How about mt driveshaft?

Tkwjh07
09-28-2011, 10:32 PM
i want carpet

c16clothing
09-30-2011, 02:48 AM
Sorry, PM box was full and now cleared.

cesdezSil80
09-30-2011, 03:11 AM
how much for shell

c16clothing
10-10-2011, 01:33 AM
how much for shell


Best offer I have gotten is $100. No longer a roller. It does have no sunroof.

c16clothing
10-15-2011, 01:40 AM
up up up! Come pick up things!

tf_90s13
10-15-2011, 07:47 AM
Do u have the fuel tank???

c16clothing
10-20-2011, 08:47 PM
No fuel tank left. Sorry.

Kodykinns
10-20-2011, 09:19 PM
Still have the center console? if so more detailed pictures of it. im looking for a very good one, very little to no scratches

igottas13
10-21-2011, 05:42 PM
need upper dash defrost vents shipped to las vegas, pm or email please [email protected]

punk138
11-04-2011, 03:03 PM
I want the shell. I pm u already but no response. plz lmk if still available thanks

xAJAxY
11-05-2011, 03:58 PM
Cluster? and rear view mirror?

HPKMotorsports3
11-05-2011, 04:56 PM
Do you have the bolt that is for the front sway bar bushing mount and also the rubber hood stopper that sits on the rad support next to the headlights?

Nickys13
11-05-2011, 05:03 PM
Still have the hood? pm me with a price

nike2991
11-05-2011, 05:14 PM
Carpet shipped to 41129?

sils1307
11-05-2011, 05:26 PM
If Nike doesn't get the carpet I want if it is in good shape!!!

sr20detS15
11-11-2011, 10:38 AM
do u still have the hoods and the tail lights? if so how much?

Eramo323
11-11-2011, 12:12 PM
Any back reg fee ?

Mrod
11-11-2011, 12:40 PM
how much for the e-brake handle cover and dash

dkson31
11-11-2011, 01:04 PM
hey I wnt your bumper and hood n head lights how much r u willing to part those out for please try make a deal dont have to much please text me at 818 292 2586

dkson31
11-11-2011, 01:05 PM
i need the hood and bumper and light contact me please 818 292 2586

hippo_chips
11-11-2011, 03:58 PM
Pm'ed, bump!

Tantwoforty
11-11-2011, 05:46 PM
may be intrested in driver fender and popup cover and maybe a few other things, im local.

sdrx-8
11-12-2011, 08:26 PM
Interested in the front and rear seats. can have the seats picked up.

eZiR- rps13
11-13-2011, 12:59 AM
interested in rear bumper and rear bumper support
pm me with price

Frankz91
11-13-2011, 03:24 AM
Radio trim if still have
I'm in pomona I

driftur
11-13-2011, 04:30 AM
I need the bolts that hold up the front subframe shipped to 96706 can reach me @ 808-223-5108

mo_hish
11-13-2011, 03:14 PM
How much for heater core?
(PM me)

blankman1991
11-13-2011, 07:12 PM
rear plastics and drivers cv axle shipped to 13903?

chapin323
11-13-2011, 07:43 PM
how much for the radiator support core

240nessx
11-13-2011, 09:40 PM
how much for the heater core inlets? just the 2 plastic nipples that bolt onto the heater core going through the firewall