apexi power fc handheld maf option ?

[Jake1992]

like the status says i cant get to it ... and its working on my nerves...
weird uh ?

in setting on the handheld theres no maf option:stupid:

help pls...

thanks !

[RACETUNE]

On the commander its in the Air Flow settings then under A/F Adjust. If you get there and it is blank, your power Fc might be locked. Message me or email me, I can assist.

-Frank Siharath
[email protected]

[s13 @ fullboost]

i just put an L-jet on my red top went into my maf options and I have the Z32 maf so I set it for that car starts but as its idling it sounds like pop corn poping out of the exhaust and I cant figure out why!!

[Jake1992]

i just put an L-jet on my red top went into my maf options and I have the Z32 maf so I set it for that car starts but as its idling it sounds like pop corn poping out of the exhaust and I cant figure out why!!

damn mate, im sorry i really cant help

On the commander its in the Air Flow settings then under A/F Adjust. If you get there and it is blank, your power Fc might be locked. Message me or email me, I can assist.

-Frank Siharath
[email protected]

ill email you , im gone for a month and not near my silvia 9000km further away and much more ...:confused:

my 10 options are ....

IGN MSP Acceler.
INJ MAP Ign/Inj
PIM VOLT Cranking
INJECTOR Water Temp
BOOST Rev/ Idle

:S :S :S

[nevertheless]

i just put an L-jet on my red top went into my maf options and I have the Z32 maf so I set it for that car starts but as its idling it sounds like pop corn poping out of the exhaust and I cant figure out why!!

I have this same problem, I just ordered the software, so hopefully it won't do that with the base maps.

[s13 @ fullboost]

Anyone else want to chime in?

[army240]

To the OP, are you sure you have the L-Jetro version of Power FC? What is the part number on the side?

S13 @ Fullboost, did you do the entire start up process of 30 min? If yes, check for vacuum leak... what are you're A/F ratio?

Frank

[Jake1992]

To the OP, are you sure you have the L-Jetro version of Power FC? What is the part number on the side?

S13 @ Fullboost, did you do the entire start up process of 30 min? If yes, check for vacuum leak... what are you're A/F ratio?

Frank

im not at home these days but im prettu sure it started with something PFC or something like that...

[army240]

PFC stands for Power FC... Its the number after that are important!

Frank

[s13 @ fullboost]

it idles at 900 15* timing at A/F 14.7 it doesn't do it anymore I got it tuned

[Jake1992]

PFC stands for Power FC... Its the number after that are important!

Frank

PFC s141010-0040