5 speed swap??

[steezywonders]

Can some one on zilvia tell me all the parts needed to swap a ka24e from auto to a 5 speed?? And a realistic cost on the whole swap..

Ive sen an ad on craigies posting that 500 for everything but it kinda seemed a little high to me... So let me know whats up!

[tqstarburst]

Yea you need an auto clutch/ brake pedal. You will also need a new gas pedal a tranny of a z33, you don't need a a driveshaft use the one your car has already. You need an ecu of a z32, you don't need to buy a new clutch you can also re-use the one your car has. You're looking about 200 bucks.


Your welcome.

[steezywonders]

Thanks, but why all the z32-33 stuff?? If my car is an s13?

[tqstarburst]

I know it is, but it comes out cheaper using z-chassis parts; believe me. Unless if you use s-chassis parts it'll be way more, i'm just trying so save you couple bucks. So if i were you i'd start searching for a z33 tranny and a z32 ecu cause they sell fast in here.. Glws.. Oh and you will also need a z32 wiring harness.

[nismo 240sx]

haha hes fucking with you
manual drive shaft
manual tranny/bracket
clutch pedal..you can trim your brake pedal and save a couple bucks
clutch cylinder
clutch lines
slave cylinder
manual ecu
clutch
thats all i can think of from the top of my head

[tqstarburst]

^edit your post now. :rant:

[steezywonders]

Lol thanks nismo...so how much cash do u think i should drop? 300?

[Shadowhunter]

Because this information is not one click away by using the search function and or google.

[steezywonders]

So its wrong just to get more advice?

[Banana_Cute]

You're not asking for advice, you're asking for parts list that has been covered for, for quite sometime now. If you look in the "FACTs and ARCHIVEs", You will find plenty of information and some.

Price varies, different shops different prices. If you're a DIY guy, way cheaper price.

[LimeLite Racing]

God damnit. A quick 30 second google search later.....
Auto to Manual Writeup (5 speed conversion) : 240SX Technical Forum (http://forums.nicoclub.com/auto-to-manual-writeup-5-speed-conversion-t181139.html)

Paypal me 5 dollars.

[drift freaq]

God damnit. A quick 30 second google search later.....
Auto to Manual Writeup (5 speed conversion) : 240SX Technical Forum (http://forums.nicoclub.com/auto-to-manual-writeup-5-speed-conversion-t181139.html)

Paypal me 5 dollars.
or if he had just looked in our Faq's and archives section he would have not one but two stickied Auto to 5 speed swap faqs . One being written by me covering S13 and S14 and the other being strictly S14 specific.

[driftxninja]

ive done this swap.

keep the automatic ecu, jump the Neutral position switch you can start it without having the clutch pushed in... make sure its in neutral if you do that...

cut your brake pedal in half.
clutch pedal
master cyl/slave cyl/ lines
trans
lower wiring for the trans
clutch kit
manual trans flywheel
manual flywheel bolts

off the top of my head thats what i had... as far as tools go

14 mm socket, extension, hole saw for the clutch pedal through the firewall, 12 mm socket, 10 mm socket... again off the top of my head. its a bitch to torque the flywheel and take the old one off, i used a crow bar to hold the flywheel from spinning.

[wonpoo]

Steezy not weezy not styling! Not smart either!!! Ahahahaha :)

[OoAtreyuloO]

i spend 350 and that was by doing my own labor.....and if you dont have exp. have everything and more before you do it...