PDA

View Full Version : nology coil into a 1991 s13 with de, how to wire?


ryan hagen
11-08-2003, 04:50 PM
i just go tmy nology coil and the coil has 3 wires, 2 on one connector (light green with black stripe) and (black with red stripe) and then a lone black wire, im guessing the black is a ground, and the 2 on the conector are a positive adn negative and then i would need to run the ground wire to the negative or leave it off?

any help would be huge, thanks

ryan hagen
11-09-2003, 10:10 PM
ok as best i have figured out, the light green and black wire is negative, and the black redstriped wire is positve, and the all black is a ground. any one know what to do? wire the negative and the ground together? or just leave off the ground? i m gonna go to the dealership tomorrow if no-one can help me and see what they say.

Ghettokracker71
12-08-2003, 12:13 PM
Hey man, did it hook up right? I'm looking for a good ignition set-up for the DOHC in my S13....

ryan hagen
12-08-2003, 03:18 PM
yah its hooked up but i didnt get to tell any differnce, i garaged my car for winter, and my car burns oil from bad rings, so i needed to change the plugs. imght take it out one more tiem with new plugs, i ll post abck if i do

Ghettokracker71
12-08-2003, 04:07 PM
Wich actual Nology Coil dld you use?

thanks