View Full Version : Call all sr20det techs
im2gq4u01
10-18-2003, 01:55 AM
Im very new and this is my first post so bare with me. I need some technical advise. Well I have a sr20det black top recently installed and im just feelin the new motor out. When i give it gas it pulls nicely till i get above 4 or 5 grand in the rpm band. My mods are hybrid front mount intercooler set up and greddy 3 in downpipe. what do i need to get to really open the top end of the the motor up cause if feel so slow. thanks
MATT
memphiss13
10-18-2003, 08:36 AM
a bigger turbo is what you need if you want it to pull hard on the top end. or shall i say, a more efficient turbo.
Do you have a complete exhaust done?
Get a free-flow cat/test pipe/resonated test pipe.
If that is done, I'd aim for a T28 turbo, it should provide help, even at 7psi.
im2gq4u01
10-18-2003, 07:42 PM
bump
Bill Roberts
10-18-2003, 07:46 PM
Check you timing...baised on what other are saying..it should be balls to the wall to at least 5.5K Only after 6.2 should it rolloff on pull.
vBulletin® v3.8.11, Copyright ©2000-2024, vBulletin Solutions Inc.