PDA

View Full Version : Evo brembos on 350z?


BlackEvo
04-18-2011, 01:43 PM
I have searched the forums for an answer and cannot find it. I have a 03 350z base model and I also have a extra set of evo calipers and rotors for all four corners. Before I tear into this on my next days off I was wondering if any of you guys have done this? Do I need to make an adapter bracket like on the 240sx or do they bolt up? Any information would be helpful....

blueshark123
04-18-2011, 01:45 PM
Im sure u will need to have to make a bracket of some sorts

TougeSC3
08-19-2011, 10:15 PM
I'd start off by checking the part number for those calipers against brembos between the Z and the EVO. Might just be a bolt on affair.

Sent from my HTC EVO 3D using Tapatalk

K_style
08-19-2011, 10:19 PM
Im sure u will need to have to make a bracket of some sorts

I'd start off by checking the part number for those calipers against brembos between the Z and the EVO. Might just be a bolt on affair.

Sent from my HTC EVO 3D using Tapatalk

Z33 Brembos are bolt on to S chassis. Evo's are not.

You will need a bracket to mount Front Calipers and some more pain for the rear.
Touge Factory sells brackets for Evo brembo conversion. or I have 1 for sale as well.

and of course you will need Evo rotors too.

lazysk8er2
08-19-2011, 10:19 PM
Im not sure but I will use an IF/Then Analysis from good ole jhs days.

If 350z brembos fit stock 240sx (after enlarging the hole)

AND

Then 240sx needs an adaptor to fit evo/sti brembos

THEN

I assume you need a bracket to bolt these babys up

K_style
08-19-2011, 10:19 PM
BTW. DO "SEARCH" first before making new thread.

http://zilvia.net/f/tech-talk/93748-check-out-my-new-big-brakes-anyone-else-do-yet.html

Halabeaster54
09-29-2011, 08:37 PM
What about the g35 brembos? Or sti?

Sent from my EVO 3D using Tapatalk