RB25det wiring (s14)

[crazyikimasho]

OK... I know this is probably a shot in the dark, but I have about 90% of my wiring complete, but there are a couple issues I am trying to resolve:

on F3 plug (R33 side) there is not a pin for F3 (S14 side):
-pin #4 (red) ignition power
-" #43 (purple/red) throttle position switch
-" #44 (light green) throttle position switch
-" #47 (yellow/blue) throttle position switch

listed here on F3 (s14 side) not located on F3 (R33 side)
-#15 (purple/white) P/S oil pressure switch
-#12 (orange) headlamp diode

Does anyone know where these need to be wired in order to get power to these as well as the main injector power wire (grey) that does not wire into the F3 harness at all, unlike the s14?

Thanks.

[s14slide]

Maybe have to forgo the connector and either hardwire it all, and for the non-existent wires on the s14 harness you'll probably just have to run a new set of wires.

A shot in the dark myself.

You know what, nevermind. I'm an idiot and have no idea what I'm talking about. Ignore me once again.
:hammer:

[Red]

I'm not sure if this will help...

This site has TUNS of good ****...

http://www.meggala.com/rb25detenglish.html