recirculating ssqv on coldside

[keada714]

hey,

I was wondering if anyone had a picture of how this is done. I'm a little confused on where it should be recirculating to. Also if anyone have the adapter to this I would like to purchase it from you for the right price of course. Thanks!

[eazye2000]

The blow off valve can go on either the cold side, or hot side of the intercooler piping.
But your recirculation entry should be put on the intake side of the turbo; After Mass Air Flow sensor, but before the turbo.

I hope that makes sense. I'll try to dig up a picture for you.

[badbob2121]

I'm a little confused on where it should be recirculating to.


like he said, the intake after the maf and obviously before the turbo

just relocate the bov to the hot pipe

[keada714]

Damn, so i'm going to have to run it all the way to the hotside? I like running the bov on the cold side. feels a lot more responsive.

[sidewaysil80]

well its going to be alot more responsive if you recirculate it properly and run back into the intake.

[keada714]

thanks, i will do this asap!!

[eazye2000]

Yep, and it wouldn't hurt to run a recirculation line from the cold side, all the way to the turbo suction pipe. I see it done all the time, but have not personally done it. I've not read any ill effects from doing this.

Hope it helps

[coup-emonster]

yeah take it back to the intake pipe of the turbo..right between the maf and the turbo..hope this helps

[keada714]

Guys. Shall do this when I get back from vegas!