Z32 Brake help

[Jordan249]

I need to replace my bleeder screws on my Z32 aluminum calipers from a auto 1990 300ZX 2+2. I put them on my S14, but aren't bleeding right. I know that they are 10mmx1 but I have found three different sized for length from different sources. Does it matter on the length? Where the hell can I get speed bleeders for this? O'rieleys seem to be the only place that carries a metric size. btw, I've seen 27mm, 33mm, and 35mm.
Thanks in advance

[homeslicej2]

Try checking with a local dealership to see what they come up with for the brakes on that particular model. When I checked Courtesyparts.com they only had one part number for the entire model range. You can check with SPLparts or Z1 motorsports as to the proper size/length as well.

[Sileighty_85]

go to dealership and order this

Its the bleeder
41128-A0100-

[joshchewuhh]

also if they arnt bleeding right make sure the bleeder is on the top instead of the bottom.

[nathanong87]

also if they arnt bleeding right make sure the bleeder is on the top instead of the bottom.

this.......

[Jordan249]

go to dealership and order this

Its the bleeder
41128-A0100-

also if they arnt bleeding right make sure the bleeder is on the top instead of the bottom.

Bleeder is on top, I know that for sure. I also already got the part number, but the nissan dealership didn't have the specifications. I would like speed bleeders however.

[Bumnah]

- SPL PARTS (http://splparts.com/store/product-info.php?pid129.html)

[Jordan249]

- SPL PARTS (http://splparts.com/store/product-info.php?pid129.html)

Well... I need z32 ones, and have already ordered some, but i guess ill just measure them when they get ehre.

[homeslicej2]

^the ones they sell are universal for Nissan (and probably others) IIRC. When I got mine they fit my stock S13 calipers I had pulled off, the J30's that I had installed, and the Q45's I had sitting around.