350Z Rear Subframe Bushing Install

[AzDRiFT]

Finally getting around to replacing the rear subframe bushings...
The new bushing kit:
http://i95.photobucket.com/albums/l150/AzCoverGirls/PICT0011-2.jpg
Couple shots of the subframe dropped:
http://i95.photobucket.com/albums/l150/AzCoverGirls/61083_430285961793_528996793_5172401_1268146_n.jpg
http://i95.photobucket.com/albums/l150/AzCoverGirls/58967_430283766793_528996793_5172388_714653_n.jpg

[AzDRiFT]

Another couple shots of the subframe:
http://i95.photobucket.com/albums/l150/AzCoverGirls/PICT0020-1.jpg
http://i95.photobucket.com/albums/l150/AzCoverGirls/PICT0022-1.jpg
Sawzall to cut out the rubber liners:
http://i95.photobucket.com/albums/l150/AzCoverGirls/PICT0030.jpg
Crap OEM bushing removed:
http://i95.photobucket.com/albums/l150/AzCoverGirls/PICT0031.jpg
http://i95.photobucket.com/albums/l150/AzCoverGirls/PICT0032.jpg

[AzDRiFT]

Rear subframe bushings in:
http://i95.photobucket.com/albums/l150/AzCoverGirls/PICT0037.jpg
http://i95.photobucket.com/albums/l150/AzCoverGirls/PICT0036.jpg
http://i95.photobucket.com/albums/l150/AzCoverGirls/PICT0035.jpg

Notice the pole jack supporting the front of the car, very important:
http://i95.photobucket.com/albums/l150/AzCoverGirls/PICT0038.jpg

[AzDRiFT]

Subframe back in car:
http://i95.photobucket.com/albums/l150/AzCoverGirls/PICT0041.jpg
http://i95.photobucket.com/albums/l150/AzCoverGirls/PICT0042.jpg

[AzDRiFT]

Car is much more solid now...I was amazed at the amount of play in the OEM bushings. Definately a big improvement.

[xilovelsdx]

this eliminate the damn wheel hop?

[Corbic]

this eliminate the damn wheel hop?

No. Wheel hope comes from the Diff Bushing and the suspension geometry.

[Corbic]

Solids? How much NVA do they put into the chassis?

I know my PBM's in the 240 set the noise and vibration through the roof.

[AzNCmB]

i need to do this to both my z's :-/

are those polyurethane or solid metal bushings?

http://i95.photobucket.com/albums/l150/AzCoverGirls/PICT0041.jpg
those are nice looking rear toe arms(spring bucket deletes).

who manufacturers them?

[mdvick]

I have a 2006 350Z and recently noticed the black liquid dripping on my exhaust. Is it better to just change the bushings or completley replace the rear subframe?