Help needed s13 sr20det red top problem

[s13coupe1988]

S13 SR20DET RED TOP
1.car will iddle ok then at 2000 rpms and then die
2. When i give it gas kinda feels like a fuel cut and will not rev NO RESPONSE AT ALL
3. Engine putters and dies
ok so far i pulled out my spark plugs and they were black and i checked inter cooler/pipeing for any leaks I changed the spark plugs igniter chip and maf but still no luck I was thinking maybe bad coil packs or bad injectors, thanks i am frustraded and want my car running asap
WHAT DO YOU GUYS THINK THE PROBLEM COULD BE I GOT THE DAY OFF TODAY SO I AM GOING TO WORK ON IT ALL DAY LONG,
VIDEO............................................. .................................................. .....................
http://s841.photobucket.com/albums/zz334/S13COUPE1988/?action=view&current=009.mp4

[s13coupe1988]

Ok anybody has some input

[VNG704]

check MAFS, connection, wiring, ground....

lots of smoke when you rev? if so, probably vacuum leak ...check vacuum lines, intercooler piping/couplers.


have you tried the "search" button? this seems to be a popular problem.

[2fast4y0u]

MAF definetely.
pull codes from the ecu and make sure its not in limp mode.
if the red light stays on when u start the car and its running, its in limp mode

[didderson]

Check your coil pack ground wire, and vacuum routing. Don't use the old egr vacuum nipple for anything, cap it off. It's found underneath the TB plate.

[s13coupe1988]

ok so I was working on my car and i noticed i had a bent fuel rail and my injectors were not sitting properly and cathching air/ leaking air i gotts doeble check my ground on my coil packs but it seems fine, I am about to pick up a new fuel rail becuase the one i have is really bad, thanks for the input i will definately check everything out.

[s13coupe1988]

ok guys i changed my fuel rail and no luck yet i checked the voltage on my maf and it was
11.0 on the black and white cable and 1.6 on the white wire? what could be wrong? thanks

[lazysk8er2]

check all your sensors. something might be coming loose with vibration.

check intercooler piping and all vac leaks.

check grounds.

check the ecu ground and ecu itself.

[s13coupe1988]

hmm i dont remember seeing the ecu grounded, i checked all my vacuum lines and they seem just fine and im going to double check my vacuum lines and ic pipeing, but like i said before signal wire for the maf is only reading 1.6 what could it be? thanks for the help

[s13coupe1988]

Ok i just posted a vid i hope it helps thanks alot

[ddf2006]

i watched the video and forsure its a sensor i can tell u that. my guess is your mafs, because even though u checked the wires, doesnt mean the actuall sensor its self isnt broken.
this happined to my mafs and wen i unplugged it i wouldnt rev past 3k.
try this, while the car is running, unplug ur mafs and see if theres much of a difference.

[chituntang]

pull codes off ECU!!!!!!!!!!!!!
Easiest thing you could have done yourself!!!!!!!!!!!!!!!

And if it is a sensor problem, the easiest way to find out is to unplug them one by one.

[s13coupe1988]

ok will do but how can i tell after unpluging the maf if its bad?
i watched the video and forsure its a sensor i can tell u that. my guess is your mafs, because even though u checked the wires, doesnt mean the actuall sensor its self isnt broken.
this happined to my mafs and wen i unplugged it i wouldnt rev past 3k.
try this, while the car is running, unplug ur mafs and see if theres much of a difference.

[Om1kron]

ok will do but how can i tell after unpluging the maf if its bad?

unscrew the maf from the intake and make sure the sensors that are hit by air aren't covered in dirt.

make sure your 02 sensor isn't fouled out as well.

check your coil pack and maf wiring to make sure it's not grounding on the chassis anywhere.

[s13coupe1988]

ok so my car finally idles perfect and it revs nice i just adjusted the tps and everything was good after that, my coilpacks are grounded to my firewall is that ok also my vac gauge reads at -25 thanks to all for the help

[s13coupe1988]

damm now my car will not go into gear lol im sure i just need to bleed the clutch

[ddf2006]

typical 240, one problem after another lol but i still love mine lol

[VNG704]

ok so my car finally idles perfect and it revs nice i just adjusted the tps and everything was good after that, my coilpacks are grounded to my firewall is that ok also my vac gauge reads at -25 thanks to all for the help
at idle my vac is at 19-20in/hg.

ddf2006, I think it's the modding.