PDA

View Full Version : need help with bmc =] <3

tamdo7114
05-27-2010, 02:10 PM
my last brake set up i was using 30mm front z32 calipers with stock rears with a 15/16 bmc.

my new set up, i'm running the same front calipers and wanted the run the same bmc but the bmc i bought is different? it is also a 15/16 bmc but it has extra fittings that i dont know what they're for. this bmc came from an auto non abs se s14 and i dont know what to do. can i still use it?

last set up bmc
http://img.photobucket.com/albums/v296/tamdo714/IMG_1469.jpg

current bmc
http://img.photobucket.com/albums/v296/tamdo714/IMG00115.jpg
http://img.photobucket.com/albums/v296/tamdo714/IMG00116.jpg
http://img.photobucket.com/albums/v296/tamdo714/IMG00113.jpg
kamilitaryman
05-27-2010, 02:45 PM
I believe those extra fittings are for ABS lines. I wish I had a picture of my '95 w/ ABS then I could tell you for sure. Does your current 240 have ABS?
iROYAL
05-27-2010, 02:56 PM
I believe those extra fittings are for ABS lines. I wish I had a picture of my '95 w/ ABS then I could tell you for sure. Does your current 240 have ABS?

You have it backwards my friend.

s14:
3 lines = non abs
2 lines = abs

The real question you should be asking is if you plug the hole you don't need will it be okay? and figuring out which one to plug.

i.e. plugging the hole

http://importnut.net/240pics/brake_upgrade/mcswap/MCswap05.JPG
kamilitaryman
05-27-2010, 03:04 PM
My bad, didn't want to mislead you. I hate plumbing lol
tamdo7114
05-27-2010, 04:35 PM
no I do not have abs. thanks for all the input. im just tryna figure out what plugs I need to plug up and if that will actually work thanks!
iROYAL
05-28-2010, 01:57 PM
no I do not have abs. thanks for all the input. im just tryna figure out what plugs I need to plug up and if that will actually work thanks!

Figuring out which one to plug is quite simple. Find an ABS model BMC from a s14 and see where the 2 lines go. Then plug whichever one you don't need.