how to remove the cap to get to the front hub bolts?

[meme]

how is that cap that covers the front hub bolts removed?

thanks

[mrmephistopheles]

tap around the sides with a flathead screwdriver.

[ultraprince]

I used a wood chisel and tapped it around the lip, then a screw driver.

[meme]

cool; i've been doing that with no luck. i'll keep trying..

got 5lug hubs from jspec and installing 300zx rear hubs. also doing the full 300zx brake swap.

[HackofDestruct]

if that fails sometimes getting a big pair of pliers and twisting the cap around a bit and then trying to get it off helps

[meme]

thanks everyone; 2 broken screwdrivers later i got it off! hehee
i got the 5 lug hub on but it seem like it is harder to turn then the stock unit.

anyways; do you use the 300zx front caliper mounting bolts? or use the stock s13 ones?

[meme]

.

[Kid Zelda]

IIRC use the S13 mounting bolts..

Are you sure those wheels will clear ?

[meme]

nope! doesn't look like it. i had the rotor on and there is about an inch between the rim and the rotor. oh well;

the s13 bolts only turn in about 2-3 turns and then it is hard to turn it. i'll give it another try.

thanks