Pulling stock side feed injectors.

[SMM]

I cannot get these stock ka24de injectors out.

Any tricks/tips?

They are being a real pain in the ass never had this trouble before.

[j20accord00]

after you took the caps off can you turn the injectors around while still seated?

a pair of vise grips usually do it for me. if that doesnt work then you can use 2 flat heads and put them in the side of the injector where the grooves are to pry them out

[SMM]

Tried that along time ago, broke injectors doing that. Yes they spin.

[wh0aitznic0]

I personally use the combination of flathead using the valve cover as a pivot point and vice grips around the circle part. Simple. Pull in bursts and twist while pulling. Should come out fairly easy.

Oh yeah, use your palm + an 8 point deep socket to push the new ones in and also, put some Vaseline petroleum jelly on the upper O rings when you put your new ones in. Make life MUCH easier.