Little Rock Roster

[JapLandDrifter]

Looking for all little rockers around the area with a 240sx or into cars at all. the scene around here isn't that big, so we need to find out all who is out there and get together to get some stuff going.
So here we go.

Name:
Car:
Location:

shoot me and pm and we can exchange numbers. Got a few ppm from base right now, so let's get this going.

[jlb8434]

Hey all,

car is S14
Going KA-t soon
Your going to be helpig me lol
and you know where I'm at.

Still keeping an eye out

:mepoke:

[JapLandDrifter]

Kevin
s14 sr20det
little rock afb

let's do this!

[XnTroubleX]

Matt
S13
Im in Shreveport!!

[moses]

They call me Ak
got an s13 with an sr
Lrafb
Got a lot of work to do before it sees the streets. working in my garage non stop hoping to hit up some of the racing before i leave for mildenhall.

[kiiro]

Thanh
s13 stock baby! just got it :p
LRAFB

[HemiCharger]

Live in between jax and cabot

s14 sr20

[DriftVader]

you got a S14 SR or S13 SR in your car?

[bj180sx]

90 s13 and 90 300zx in Russellville.

[DriftVader]

BTW- anyone good with wires? Trying to wire up my car right now. Ive got it to crank over, but its jut a slow crank and seems like power is getting drained.

[elgranplatano1]

hey guys..
Jonathan C
s13 project car
jacksonville
i got a lot of work to do

[BigDaddys240]

Just put the deposit down on an S14. Can't wait to get it in the driveway.

Craig
Bryant

'83 280zx 2+2 NA
'79 Olds Cutlass bowtie 350w/4spd manual trans
'99 Burb

Hey Vader, I can help w/your wiring. Email me.

[DriftVader]

Got my wiring issues fixed. BUt car still is miss firing and wont rev passed 4k and idles like shit. yay! Almost there!

[BigDaddys240]

Cool, good luck bro.

[westly7]

westley
s14 with blacktop sr20
little rock

[lucky_brett]

1992 Nissan 240SX SE Coupe
Fayetteville, AR

I am going to school at UofA, and my parents live in Little Rock always down to meet up with other enthusiast.

[SilviaxDr3aMz]

Hey,

Jamal
Red S13 coupe. Mods: Rims w/ 3' Full cat-back exhaust, just recently swapped to a 5 speed.
In San Marcos, currently enrolled at Texas State. Woot!

[cbt240sx]

Josh
1990 S13 Hatch, Single Slammer!
Little Rock, Central :wavey:

I slack off, play in metal bands and dork out on my car. Slowly acquiring parts for my 5 speed swap....little.....by.....little....ffs. After that, looking into forced induction. I<3 my KA but would swap a RB faster than a cat could lick its ass!!

[WESamiss]

Wes
95 s14 sr20 built - sold
94 Miata torsen lsd 1.8l - sold
92 s13 coupe - daily shitbox....
LRAFB

[sr20det-s14]

kalob
still looking for a 240
little rock AFB

[Slayde]

Jason
92 S13 HICAS engine-less (let me know if you gotz a KADE)
Austin Arkansas

and for you riders out there
2008 R6 --- For sale PM for details Trades?
2009 R1 --- Awesome.

[Munnerlyn]

Munny
S2000 (Looking for another S13 Cpe)
Texarkana, TX (Always in Fort Smith and Little Rock.... A member of Arkansas's Team Sun*Works (http://teamsunworks.com/forum/) Chapter)

:wavey:

[Darkvillin]

my friends call me chill.

conway arkansas

95 s14 (trying to finish putting on my 98 front end)
88 z31 300zx DD

im down to meet up on fridays or saturdays! add me to the roster!

[levelgx]

Name: Ricky
Car: 90 Hatch s13 SR
Location: LRAFB

mods,5lug, seatbelt conversion, full 300zx brakes, hks exhaust, greddy FMIC, plus more small things

[DriftVader]

Name: Ricky
Car: 90 Hatch s13 SR
Location: LRAFB

mods,5lug, seatbelt conversion, full 300zx brakes, hks exhaust, greddy FMIC, plus more small things


DiD you build the engine yourself or was it bought? you have any experiance with working on SRs?

[S@nt0s]

Santos
EVO VIII, T66 SR Silvia
Im from socal but here at SAFB then head to little rock for a month in april before heading back to cali. ill be there april 7th but ill be in my silver EVO VIII

[levelgx]

I bought the motor from a friend while in germany and we installed it.. I had it there for a little while and traded it for a bike.. then like 2 years later we traded back lol, But I don't have a ton of experience but I can problem solve well.. When I got my car back it sputters at low rpm trying to accelerate. I got it back right before I deployed to I didnt have much time to trouble shoot but it shouldnt take me long to figure it out... Guessing you having some SR problems?

DiD you build the engine yourself or was it bought? you have any experiance with working on SRs?

[DriftVader]

Ya i got my s14 sr20det in my car and its running rich. i live on base lol. once i get it running good, im taking it out.

[racenaked180sx]

I currently live in ok but im from cabot. I use to have a 98 kouki then got a 91 s13 hatch had black top sr with alot of mods then sold that to save for awhile. Im buying another s13 in about a month and it will be a slow build. My friends in cabot have hatches with sr's as well!

names weston by the way

[WESamiss]

Are you talking about Tyler and Eric?

They are nice guys.

[DriftVader]

they love you long time wes?

[racenaked180sx]

yea tyler and eric ive known them for years and years lol. they are nice guys some of the best ive known!

[WESamiss]

driftvader, wait a minute, i know what your doing. your going to try and steal my camera!

Yeah they are great guys.

[frenchy]

the names Tommy
90 hatch with ka24e hopefully supercharged soon just for the hell of it lol
im from Jonesboro.

[sr20det-s14]

Well I found me a car but its far from perfect and its having issues atm. But its a 97 BMW 328i with a m3 swap and no interior or passenger fender

[h11m1vn]

What's up everyone
Ivan here from Russellville, AR
Stock KADE 91 Hatch, Hopefully running in the next week or two

Nice to see I'm not the only one in the area with 240 love

[Darkvillin]

just because i haven't seen anyone post it up in this thread..... IF YOU ON AN S-CHASSIS (or you just want to come chill...) VISIT THIS THREAD AND COME MEET UP WITH US IN LITTLE ROCK!

http://zilvia.net/f/south-central-states/362068-little-rock-240sx-owners-meet.html#post3824297

end of message....

[Darkvillin]

anyone need a driver side fender (s14 zenki) that is in good shape or a driver side zenki headlight or driver side zenki corner light or a driver side zenki fog light? i have all and all are in good shape. i finally got most of my kouki conversion parts on my car and i have no use for these parts. i also have a zenki se spoiler if anyone is interested. i figured i'd post it up in here so my local zilvians could see it. i can put pictures up here if you'd like or i can text you pics of whatever you are needing. just send me a pm. And can we get another meet organized and going sometime soon?

[h11m1vn]

+1 on another meet ^

[S@nt0s]

Seen. White s13 coupe with mismatch wheels off McCain this afternoon. I was in my Evo

[sr20det-s14]

Anyone know where I can get a 240 for a decent price running or otherwise

Sent from my PC36100 using Tapatalk

[DriftVader]

what ya looking for? s14? s13? hatch coupe? with an sr?

ive still got my s14 with the s14 SR in it for sale.

[jdm501]

Josh
1990 s13
2001 LS1 headers, intake
no exhaust
LRAFB

[bigwatts]

jason
96 s14
sr20det
manifold, exhaust, fmic, custom inerior, etc

[Encore]

John
96 S14
stock
LRAFB.

thread has been dead for a few months, we should set up a meet.

[DriftVader]

once i get my sr in and running, sure lets do it.

[GetMyDrift?]

Think we are going to have a little meet tomorrow in Little Rock. Message me for details.

[479]

Fort Smith.
S13 hb.
got broken into.
so trying to fix all crap they broke.

[bllabong89]

Andrew
S14(soon to be silver) kouki front
Rb25 and normal bolt-ons
LRAFB

[Michaelwinne]

Mike
S13 with no engine! Ripping out the ka for an RB25!
LRAFB

[racenaked180sx]

weston
s14 zenki with s14 blacktop
wlr

[freeagent3117]

Mike
S13 with no engine! Ripping out the ka for an RB25!
LRAFB

That bitch is gonna rip!!

Adam
S13 Hatch
SR20det, well it comes freight Tuesday!!! :naughtyd:
Cabot, AR

[Michaelwinne]

That bitch is gonna rip!!

Adam
S13 Hatch
SR20det, well it comes freight Tuesday!!! :naughtyd:
Cabot, AR
Dude we'll be installing that in less than a week!

[s0fa king]

post pix of the install.

[479]

with all these swaps going on, anyone got a ka24de laying around?

[freeagent3117]

post pix of the install.

Well one of the o2 housing studs was broke the fuck off from shipping? So I bought a new replacement turbo which comes around Friday. Will post pics soon....

[Michaelwinne]

Well one of the o2 housing studs was broke the fuck off from shipping? So I bought a new replacement turbo which comes around Friday. Will post pics soon....

You better post them shits!

[freeagent3117]

post pix of the install.


heres a small timeline of where im at....

This is the 1990 Auto i picked up for $900. It was running too!! All the purple stuff is old tint :rolleyes:
http://i32.photobucket.com/albums/d2/freeagent3117/2011-11-23_154338.jpg

Time to get started on tearing the motor out and converting to a 5-speed
http://i32.photobucket.com/albums/d2/freeagent3117/2011-11-26_130251.jpg

This was a pain in the ass to install!!
http://i32.photobucket.com/albums/d2/freeagent3117/2011-11-26_130316.jpg

Just some presents for me
http://i32.photobucket.com/albums/d2/freeagent3117/2011-12-09_145605.jpg

Motor out and cleaned up with some rattle can black
http://i32.photobucket.com/albums/d2/freeagent3117/2011-12-25_185345.jpg

Got the S13 black-top shipped to my garage for $1875 w/o MAF (have sohc)
http://i32.photobucket.com/albums/d2/freeagent3117/2012-01-04_110757.jpg

Went to attach my new o2 elbow and found shipping damage on turbo! FML...
http://i32.photobucket.com/albums/d2/freeagent3117/2012-01-06_134955.jpg

While waiting for new turbo more parts for me
http://i32.photobucket.com/albums/d2/freeagent3117/2012-01-10_211717.jpg

New ISIS turbo w/lines, fresh paint on exhaust manifold and o2 bolted on
http://i32.photobucket.com/albums/d2/freeagent3117/2012-01-13_142155.jpg

Installed on motor
http://i32.photobucket.com/albums/d2/freeagent3117/2012-01-13_161627.jpg

Stage 3 clutch with resurfaced stock flywheel. Put all on and forgot to install my new rear main seal lol. So yea had to start over on that :cj:
http://i32.photobucket.com/albums/d2/freeagent3117/2012-01-13_165837.jpg

And thats where im at now. Got to get tranny on and drop motor in. Harness is prepped. FMIC needs install and other random shit. This IS a low budget build so no haters!!! This is also gonna be my dd so nothing to crazy here.

[Michaelwinne]

Njnnj
Stage 3 clutch with resurfaced stocK flywheel. Put all on and forgot to install my new rear main seal lol. So yea had to start over on that :cj:


How could you forget the rear main seal?!?!?! Wtf bro!!!:duh:

[freeagent3117]

Well been working hard on this dam car and made some more progress. Heres what I got so far!!!!

This is with the tranny attached and ready to go in!!
http://i32.photobucket.com/albums/d2/freeagent3117/2012-01-15_165135.jpg

I didnt like seeing my $$$$'s floating in the air :bite:
http://i32.photobucket.com/albums/d2/freeagent3117/2012-01-16_153940.jpg

Bolted in, mounts are a pain in the ass if you ask me.
http://i32.photobucket.com/albums/d2/freeagent3117/2012-01-16_180640.jpg

Now that I know where the pipes go I mounted the front mount.
http://i32.photobucket.com/albums/d2/freeagent3117/2012-01-21_112838.jpg

Radiator in, bunch of other stuff. Wiring and vac hoses and shes good to go!!
http://i32.photobucket.com/albums/d2/freeagent3117/2012-01-21_123419.jpg

[zuergJC]

Name: Justin Cunningham/Jorge Acevedo
Car: white 1995 base model 240sx
Location: Jacksonville

Getting the car ready for turbo sticking with the KA
http://i2.photobucket.com/albums/y50/takecarebob/240sx3.jpg

[ziptiemechanic]

Anybody need a KA24E?

[s0fa king]

Bump. Car up and running freeagent?

[Michaelwinne]

Bump. Car up and running freeagent?

Freeagent is an ass hole he had the car running for 2 weeks then sold it!:wtf:

[sr20det-s14]

long time no been on here lol. but im back and im getting a s13

[Michaelwinne]

Is there anyone out there that has an RB25 swapped 240? I'm just about done with my swap and I can't get my RB started and if there's someone out there with the same engine I can diagnose my problem with a little help! C'mon there's gotta be an RB around here somewhere!

[s0fa king]

bump. where is everyone?

[daftcon]

still here. we need to start enjoying these cooler nites. when was the last time anyone put together a no shit meat? HAH i said meat!

[CabotZ]

Jumping in as a new member, reading up on the z cars with hopes of having one in the garage soon.

Glad to see several members close, have a strong feeling some are actually in the neighborhood.

[NinjaPeekABoo_S14]

New member here. Just seeing who all is local. Name is Jake and I live in Cabot.

http://i271.photobucket.com/albums/jj133/arkansas_cars/2012-08-03_12-35-39_163.jpg

[CabotZ]

Bobby Kelly
Stock S13 convertible
Cabot

looking to turbo the ka and do a manual swap.

[ziptiemechanic]

I got a s13 manual brake pedal for sale if interested.

[daftcon]

jake thats a clean s14 u got there. i've got the same exhaust set up.

[CabotZ]

I got a s13 manual brake pedal for sale if interested.

Depending on how soon I start on the conversion I may be interested. Right now I am going to start looking for a transmission first.

[NinjaPeekABoo_S14]

Thanks man. I didnt want to go with the bigger exhaust. I thought it was just to gawdy. I was talking to Vitally from ace up and we were talking about the isis coilovers. He told me that they could be slammed if i was into that fatlace stuff. Im just wanting a clean S14 im not affraid to take to the track.

[daftcon]

Thanks man. I didnt want to go with the bigger exhaust. I thought it was just to gawdy. I was talking to Vitally from ace up and we were talking about the isis coilovers. He told me that they could be slammed if i was into that fatlace stuff. Im just wanting a clean S14 im not affraid to take to the track.

yea im tempted to try out more of the isis stuff. picked up the radiator and fans too, so far i'm really pleased. where'd you get those mud guards from?
i'm diggin the lsu decal on the ram for sure!

[NinjaPeekABoo_S14]

yea im tempted to try out more of the isis stuff. picked up the radiator and fans too, so far i'm really pleased. where'd you get those mud guards from?
i'm diggin the lsu decal on the ram for sure!

I remember your 40. I saw it heading into jacksonville right passed the first cabot exit. Me and my wife were in the juke. You may remember it if you saw race naked on the back window. The mud flaps came with the car and i refuse to take them off. I like the looks of it. As far as the LSU sticker its not my fault i picked a team that can win unlike them hogs.

[daftcon]

I remember your 40. I saw it heading into jacksonville right passed the first cabot exit. Me and my wife were in the juke. You may remember it if you saw race naked on the back window. The mud flaps came with the car and i refuse to take them off. I like the looks of it. As far as the LSU sticker its not my fault i picked a team that can win unlike them hogs.

i do remember laughing at the race naked, dont remember what car it was on tho. and those flaps are sick as hell man, id leave them on too. btw i wasn't doggin u on the lsu thing, i'm from louisiana and am a huge lsu fan too. it's a good thing!

[NinjaPeekABoo_S14]

i do remember laughing at the race naked, dont remember what car it was on tho. and those flaps are sick as hell man, id leave them on too. btw i wasn't doggin u on the lsu thing, i'm from louisiana and am a huge lsu fan too. it's a good thing!

Oh I know you weren't doggin on me. My wife is from Louisiana too. I been a LSU fan all my life. I remember seeing your car that day and I told my wife look baby he's got the same exhaust as me. She called me a nerd haha.

[daftcon]

Oh I know you weren't doggin on me. My wife is from Louisiana too. I been a LSU fan all my life. I remember seeing your car that day and I told my wife look baby he's got the same exhaust as me. She called me a nerd haha.

my wife gives me shit cause my car draws more attention from dudes than chicks lol. she doesn't get it :-/

[CabotZ]

Gonna start looking for a 5 speed soon. Want to start grabbing parts for the swap.

Sent from my SAMSUNG-SGH-I847 using Tapatalk 2

[Michaelwinne]

Hey guys I'm tossing around the idea of selling my RB25 swap and going with a V8 swap of some sort. Lmk of anyone would be interested in buying my swap I have a 95% complete swap.

[ziptiemechanic]

Gonna start looking for a 5 speed soon. Want to start grabbing parts for the swap.

Sent from my SAMSUNG-SGH-I847 using Tapatalk 2

Got a s13 manual brake pedal. $40

[ziptiemechanic]

Anyone know who owns the S15 Silvia on LRAFB?

[daftcon]

Anyone know who owns the S15 Silvia on LRAFB?

i still haven't met him. wes talked to him, said he was prety cool. not sure his situation, but i hate his guts!!!! lol i'm an active hater, fueled by pure jealousy. but in all reality i'm sure he's a cool cat.

[CabotZ]

How often do yall meet?

I would like to meet some of the local scene and see how your cars are set up. I am undecided on my build. Right now I have a KA24DE that needs to be gone through.

[Michaelwinne]

How often do yall meet?

I would like to meet some of the local scene and see how your cars are set up. I am undecided on my build. Right now I have a KA24DE that needs to be gone through.

I got an RB25 I'm selling if you'd like to go that route.

[CabotZ]

Its gonna be a slow build. Wouldnt have the money to buy it right now.

Actually just thinking about reworking the KA since thats what I have already.

[CabotZ]

Looking for cast turbo manifold. If anyone local has one.

[daftcon]

started sanding my car today. that shit is no joke. pretty time consuming. anyone else have a diy sand and paint job? it was recommended to me that i use a 600 grit wet sand for prep. haven't even talked about sanding primer and paint and all that good stuff.

[CabotZ]

Think I may need freshen up the KA. I intend to build a mild KA-t (somewhere around 250 HP)

Any recommendations on machine shops in the central ar area thats familiar with the KA blocks.

[daftcon]

^ one shop i keep getting recommendations to is motor pro. they're right outside the base on general samuels road. i stopped by there one time to see what the guy could do in terms of a build, and he sounded like he really knew what he was talking about. like i really didn't have to dig for info on what i could get done. my neighbor just got his vtec rebuilt and it's holding up really well so far.

i need to find me a beater ka that i can tear down and build up... anybody?

[CabotZ]

He was who I was thinking about. I had a stepped dsm flywheel resurfaced there and he done a great job.

[CabotZ]

Anyone local have a KA crank

[Akiros]

Nice. I had no idea about motor pro. I'm in Little Rock as well. I have an rb'd convertible.

[daftcon]

i talked to the dude at motorpro today and i found out that you can't bring your own purchased parts for him to put in. something about the liability of what you might bring him. which is understandable. so it looks like i'm going at it all by myself! i think he's still good for machine type work tho. boring, resurface, port n polish, that type shit.

[sr20det-s14]

Had a bad experience with him and am going to go to rebel rebuilders anytime after I need an eng ine rebuilt in anything

[SLiDe_WaYz]

350Z
Shreveport/Marshall.

[ocn]

what up just got to Litte rock afb dec3, ill be at the auto hobby shop soon pulling my blown SR20 an swapping a newer one into my coupe. seeing if theres still people from the area hangin around.

[sr20det-s14]

I'm still here fixin to get a s14 on Saturday hopefully

[miggy20]

s14 in shreveport,LA

Its up for sale shoot me an email or pm.

sr20det turbo and much more.

[sr20det-s14]

I got my s14 and my buddy has a s13

[sr20det-s14]

anyone have a s14 parts car with good rocker panels mine are shot and I need to swap em with good metal

[s0fa king]

what up just got to Litte rock afb dec3, ill be at the auto hobby shop soon pulling my blown SR20 an swapping a newer one into my coupe. seeing if theres still people from the area hangin around.

Have you pulled it yet?

[sr20det-s14]

anyone got a blower motor for a s14 mine don't work

[sr20det-s14]

anybody got two exhaust cams from a 91 to 93 car I need them for a cam swap I wanna do

[miggy20]

She's up for sale check out the links all info is on there.

http://zilvia.net/f/cars-sale/513327-97-240sx-s14-sr20det-engine-8500obo.html

[ninja_mechanic]

I go by ninja_mechanic here and by Teruya in japan. I run a 2001 lexus is300 and stay in jacksonville. Yes i know its a "Z" and 240 forum mainly. I'm just getting my name out there trying to work on my street reputation.

[ninja_mechanic]

Wow i soooo just killed this topic.

[miggy20]

Wow i soooo just killed this topic.

I Don't get why you posting in ARKANSAS post if your in JAPAN and in FLORIDA

LOL. :wtf:

[ninja_mechanic]

I am in arkansas. Guess i need to update the profile again.

[ninja_mechanic]

I Don't get why you posting in ARKANSAS post if your in JAPAN and in FLORIDA

LOL. :wtf:

Did we not look at my location on the left???

[sr20det-s14]

Nah were all friendly people. have you tried lr240 Facebook page its better then here cause people actually talk to each other on there.

[crewchief05]

Paul
s14 w/sr20
looking for a s14 ka speed sensor. let me know.

[Chrisk0]

Hey guys. Really surprised how many people in my area had 240sx's! That's respectable haha.

Chris
91' s13 Hatch
Jacksonville

It's a work in progress, currently waiting for sr20det swap.

[Chrisk0]

Hey by the way saw some posts about people looking for some KA parts, I have a ka that I'm rippin out of my s13. It doesn't run but if you could still use the parts or if you just wanna buy the whole thing with the transmission for CHEAP just pm me ;)