PDA

View Full Version : clutch problems


514nissan240sx
02-26-2010, 10:09 AM
hello everyone. i have a 1996 nissan 240 with a silvia conversion it is a ka-t. i am having a huge problem with clutches. my car makes 514 hp on 21 psi and 480 fpt. my problem is slipping when i shift. i have had a act 2600 in it and that lasted maby 3k miles and if never held a good shift it looks like im lookin to need a twin disk any other ideas? i have been threw 2 clutches so far. thanks for the info

azndummie
02-26-2010, 10:13 AM
make sure the master and slave cylinders are not malfunctioning. If those are alright i would sugest getting an exedy twin disk.

MadScientist
02-26-2010, 10:26 AM
OK ... Plain and Simple... Single is only good for about 400 hp... Twin Plates are good to about 600-800 depending, and 700+ should be Triple.

I have an OS Giken STR... its a Sprung type so its good for DD and Street-able, but can handle track abuse. If you want something more aggressive, go Un-Sprung.
I have the same OS Giken STR on my EVO9MR (un-sprung) and it takes allot of abuse.

The only complaint I have about Un-Sprung is you will need to change how you drive, and Heal/Toe on every Downshift... when the clutch is cold it will chatter and when being used allot (traffic) it will bark, scream, and embarrass you like your car is falling apart.

Other then that... fuck-em if they don't know power when they hear it!!!

-Drew

SoguRacing
02-26-2010, 10:32 AM
you need a clutch with more holding power. plain and simple. also make sure that your master and slave are working properly.

R33E8
02-26-2010, 10:33 AM
I think the only company that makes a twin disk for a KA is competition clutch.. i heard it's good for over 800hp (I dont remember seeing how much torque...)

514nissan240sx
02-26-2010, 10:12 PM
thanks guys i appricate it from what i under stand u can use a 300 zx clutch not sure does anyone else know? also ive read that ppl use the 350z clutch options with the flywheel because its 250mm vs a 225 ka flywheel anyone have any idea

514nissan240sx
02-26-2010, 10:14 PM
and i kno the master slave is good have changed them out it none have ever slipped untill i shift everyone says i just shift to fast lol