View Full Version : I Racing X Charles Ng Formula D 2010 4-Rotor RX8

02-17-2010, 10:52 PM
I am very proud to be the driver of BMI Racing with their 4 Rotor RX8 for Formula D 2010! My dream has come true :)

Please come and support BMI Racing/Charles Ng at Formula D Long Beach FD Round 1!!!

http://www.mazdausa.com/MusaWeb/disp...e67#modsummary (http://www.mazdausa.com/MusaWeb/displayPage.action?pageParameter=mazdaSpeedTuningP ersonal&sectionParameter=tunerProfile67#modsummary)

“We made the jump to pursue motorsports opportunities here in America - sport compact motorsports like drift, drag and time attack,” explains Sarah. “In Australia sport compact competition is more hobby based with no professional outlets; it’s very V8 based, too. For us, America is where it’s at.”

Adam had made numerous trips to America to tune Haltech-controlled cars and got to know the market well before setting up shop in Gardena, California.

The company’s latest creation is a true jaw-dropper that is primed for some next-level performance. The car is a 2009 Mazda RX-8, but the shock and awe are under the hood in the form of an exotic four-rotor powerplant.

Not to be confused with the three-rotor 20B rotary from the Mazda Cosmo, four rotors are rarified air indeed. The last one Mazda made, the R26B, won the 24 Hours Of Le Mans in 1991 and Mazda has never offered four rotors for public consumption.

Power hungry rotor heads that want that “big-block thrill” must step up and build their own four-rotor monster.

Adam did just that, joining a pair 13Bs at the hip by extending the dowel pins and through bolts to accommodate four housings. A one-inch aluminum plate was added in the sump area for extra rigidity.

The engine features a custom three-piece eccentric shaft that transfers the power to the drivetrain. Adam built the engine and gave the housings a peripheral porting and fitted the rotors with high-tech 2mm ceramic apex seals from NRS Seals.

The four-rotor inhales though a custom K&N infested airbox and exhales through a trick header that’s stepped from 1.75 inches to two inches before merging into a Burns Stainless Headers 4-into-1 collector and funneling into a 4.5-inch boom tube that exits at the passenger-side door.

A Haltech Platinum Sport 2000 ECU installed and wired by Sarah controls combustion. The fuel system features twin Bosch Motorsport fuel pumps feeding four 1200cc RC injectors while eight Chevy LS coils provide spark. This combination, tuned by Adam, battered the rollers to the tune of 610whp.

Adam says the biggest challenge in building the aftermarket four-rotor was the cooling system. He spent two weeks modifying the center housing to allow for better cooling.

The rotary relies on Davies Craig electric water pumps, a NASCAR radiator from Griffin and massive fans to control the coolant flow. Adam then monitored the temperature of the engine using five water temp senders located in various positions around the engine.

All that power is introduced to the pavement via an EMCO four-speed transmission fitted with a SPEC triple-plate Carbon/Carbon clutch, SPEC flywheel and a limited-slip rear differential provided by Tomei.

The high-strung Mazda is looking to make an impression in Formula DRIFT competition in 2010 with driver Charles Ng at the controls.

The RX-8 certainly looks the part with carbon-fiber hood, doors, trunk lid and roof from AIT Racing. An APR Performance GTC-500 rear wing provides tunable downforce in the rear, while an APR lip spoiler smoothes airflow up front. Adam cut, shaped and installed all Lexan windows in the RX-8 to enhance safety and further lighten the sleek coupe.

Inside, the car is ready for battle and any unfortunate impacts that may be in the cards. Adam fabricated the Mazda’s 10-point roll cage, installed a Momo steering wheel with Momo quick-release hub, and a Racepak IQ3 Dash with integrated datalogging system. He then trimmed the cockpit with carbon dash materials supplied by AIT Racing and dropped in a Momo Safari racing seat and Momo harness system.

Drifting puts a big emphasis on suspension. To this end, BMI is working with Eibach running the company’s shocks, springs and sway bars, along with the steering geometry magic that is needed to attain those crazy angles.

A good set of brakes can earn their salary in an instant by keeping the car off the wall when the drift goes awry. In the BMI RX-8, Disc Brakes Australia (DBA) rotors are squeezed by Brembo calipers and Pagid pads. The Mazda runs 14-inch DBA rotors up front and 13-inchers out back.

Look for this “big-block rotary” monster on the Formula D trail in 2010; the party starts April 8th in Long Beach, California.

02-17-2010, 11:08 PM
no way dude! im happy for you! i remember riding with you in your hatchback at adams months ago. I was amazed at your skill.

02-18-2010, 12:25 AM
congrats....that 4 rotor must sound unbelievable in person.....I guess I'll be seeing it at longbeach!

02-18-2010, 01:59 AM
WHOA Congrats Charles! I remember you from one of my events!

02-18-2010, 02:05 AM
Congrats Charles.

Your work payed off man, way to stay focused on the dream.

Wish you the best of luck in FD. and will be out supporting another great Socal driver. Woooooohooo!!

02-18-2010, 03:54 AM
Charles congrats man. I can't wait to see you tear it up this year.

02-18-2010, 09:40 AM
nice...congrats to you sir...

02-18-2010, 10:17 AM
Congrats sir.

I'm stoked for the 4-rotor.

02-18-2010, 07:55 PM
gooooooo CHARLIE!!!......

02-22-2010, 12:58 AM
Big Congrats Charles! We going to see you at any Redline Event's this year?

02-23-2010, 02:24 PM
Big Congrats Charles! We going to see you at any Redline Event's this year?

Thanks! :)

Depending on my FD team and my race schedule in Asia.

02-23-2010, 02:28 PM
yay charles!!!!!!!!!! way to keep ur eyes on the prize. look forward to seeing u rip shit up at formula this year.cant wait to hear that 4 rotor