will RS200 VLSD (skyline R32) bolt in to S14?

[bonzelite]

i have been told that the VLSD from the R32 Skyline, the RS200, will bolt in to the S14 rear-end with only back cover plate hole issues. is this true, ie, is the VLSD from the R32 a good swap into the S14?:confused:

[AKADriver]

It's R200, not RS200. And that's only for the GTS models; the GT-R uses an R230 in the rear (IIRC).

The input flange for the driveshaft might be different, also.

Gearing could be all off depending on which version you grab. I believe a lot of them used a 4.363:1 final drive (versus 4.083:1 for the 240SX).

[bonzelite]

thank you for clearing that up. i'd prefer to just find an S14 VLSD, but i will use what i can. :)

[pinoydrifter]

Do a search... there are alot of threads about vlsd's!

[RBS14]

It won't bolt into an S14 but with the use of the R32 axels the diff will bolt into the S13..... a fellow PANDA did it.... JDM TYTE!

[nokeone]

mine is actually R33...:)

PFL yo!!!

[bonzelite]

what is a "panda"? i don't mean the bear.

[nokeone]

Originally posted by bonzelite
what is a "panda"? i don't mean the bear.

PANDA is as PANDA does..

u must :bowdown: to PANDA..

recolize :newbie: ..

you must first know thine own self before the knowledge of PANDA can be yours..:bow: