question about z32 brakes??

[westly7]

i just bought z32 30mm aluminium front calipers from here and i've been searching about how to install it and found out pretty easy.but i read one thread in nico club that i need adapter to put that on in my s14 which is i thought they were bolt on?? so do u think i need a adapter or bracket for these thing??
and should i get the hardware and pads from store like autozone or go with nissan? thanks for helping guys

[upsdude]

s14 brake lines use a diff type of fitting than z32. check out pdm racing they make braided conversion lines that go from the caliper to the hardline of the car. can't get any simpler than that. i ordered the front/rear lines just gotta wait for them to be shipped to me house since they're coming from canada eh!

PDM Racing - PDM Brakestop Stainless Steel Brakelines (http://www.pdm-racing.com/products/brakeslines.html)

[mrchomponthis]

this thread scares me

[shogun!]

i just bought z32 30mm aluminium front calipers from here and i've been searching about how to install it and found out pretty easy.but i read one thread in nico club that i need adapter to put that on in my s14 which is i thought they were bolt on?? so do u think i need a adapter or bracket for these thing??
and should i get the hardware and pads from store like autozone or go with nissan? thanks for helping guys

Hmmm???

I always thought that S14 already have the 4-pot calipers for 30mm discs (front). Original in cast steel but anyways.... The calipers you bought are made of aluminum and are a bit lighter but should be an easy install

(Off with original good 4-pot calipers and replace with the aluminum ones)

Sounds a bit waste of money (but on the other hand you save a pound or two in weight)

[CNDC]

there is no bracket required. it bolts right up. the only thing different is the brake lines you need 300zx ones.

[westly7]

Hmmm???

I always thought that S14 already have the 4-pot calipers for 30mm discs (front). Original in cast steel but anyways.... The calipers you bought are made of aluminum and are a bit lighter but should be an easy install

(Off with original good 4-pot calipers and replace with the aluminum ones)

Sounds a bit waste of money (but on the other hand you save a pound or two in weight)
nah man..my stock s14 front brakes only come with ONE piston every caliper,with this upgrade i will be have 4 pots in one caliper which is massive stopping.

there is no bracket required. it bolts right up. the only thing different is the brake lines you need 300zx ones.
yeah i ordered one for z32 from enjuku racing this morning..cant wait!!

this thread scares me
no man..paranormal activity was scarier than this lol

[shogun!]

That is great pal. Here in Europe AFAIK all S14 have the 4-pot calipers.
You will have a awsome change in stopping.

So...

You will need new steel braided lines. The original ones come with a banjo connection on the caliper. (Ring in the end of the line with a hollow bolt inside and copper washers). You shall not reuse the old line because the new calipers do not have a notch that prevent the banjo from twisting sideways (it may twist loose = no breakes). The new lines need to have a threaded end without banjo (the threaded end go straight in the new calipers.

Old setup with banjo end
http://200sx.kicks-ass.net/shogun/img422740a4ea619.jpg

New setup without banjo
http://200sx.kicks-ass.net/shogun/img477b683577e36.jpg

nah man..my stock s14 front brakes only come with ONE piston every caliper,with this upgrade i will be have 4 pots in one caliper which is massive stopping.

[projectRDM]

no man..paranormal activity was scarier than this lol

No, really, you asking the most basic, remedial question ever to be asked on a car forum is much scarier. Further proof that even by age 26, people can still be ignorant as fuck.

[MADE]

I just did this, well 90% done when you get the conversion lines everything fits. But the R33 cables have to be modified since the first brackets that attach to the subframe are a bit different than the S14. Out of all the post thats said its a direct fit. I only found one that mention the brackets.

[projectRDM]

I just did this, well 90% done when you get the conversion lines everything fits. But the R33 cables have to be modified since the first brackets that attach to the subframe are a bit different than the S14. Out of all the post thats said its a direct fit. I only found one that mention the brackets.

Which has absolutely nothing to do with the front calipers, which is what the kid asked about. Awesome post.

Why not discuss other non related things like your dishwasher and really confuse him?

[Sileighty_85]

http://i73.photobucket.com/albums/i235/Neil_85/Gifs/everybodyfacepalm.gif

[MADE]

Which has absolutely nothing to do with the front calipers, which is what the kid asked about. Awesome post.

Why not discuss other non related things like your dishwasher and really confuse him?

HAHA
Maybe this would save him a post. Besides I have a Maytag dishwasher so maint/install not an issue. But your right as usual and in the usual way.

[westly7]

No, really, you asking the most basic, remedial question ever to be asked on a car forum is much scarier. Further proof that even by age 26, people can still be ignorant as fuck.
well i just want to make sure that everything going good when im doing the brakes upgrade.im 90% sure that this will fit bolt on but after i saw those thread on nico i think there is nothing wrong to put some question here.hey man u probably know better about car better than anyone here but if u think u dont want to help ppls here to know or learn more about cars..why dont u make yourself helpful for somebody else instead of bitching here..i just dont get it..maybe u just had a bad day

[projectRDM]

well i just want to make sure that everything going good when im doing the brakes upgrade.im 90% sure that this will fit bolt on but after i saw those thread on nico i think there is nothing wrong to put some question here.hey man u probably know better about car better than anyone here but if u think u dont want to help ppls here to know or learn more about cars..why dont u make yourself helpful for somebody else instead of bitching here..i just dont get it..maybe u just had a bad day

I'd reply, but I can't read Ebonics.

[codyace]

No, really, you asking the most basic, remedial question ever to be asked on a car forum is much scarier. Further proof that even by age 26, people can still be ignorant as fuck.

I'd reply, but I can't read Ebonics.

Where is the rep button when we need it? Hahha.


Reading, and searching for information are really lost artforms anymore. I get a kick out of people who can't find information (like the O/P) but I"m undoubtedly sure know how to use pornotube, or similar lol.

[projectRDM]

Where is the rep button when we need it? Hahha.


Reading, and searching for information are really lost artforms anymore. I get a kick out of people who can't find information (like the O/P) but I"m undoubtedly sure know how to use pornotube, or similar lol.

I prefer keezmovies.com, better search engine.

[codyace]

I prefer keezmovies.com, better search engine.

green dots a growin. I'm about to go eat today, but I've got a list of things to see if you still have them for sale. Money Order obviously is no issue :D

[!Zar!]

I prefer keezmovies.com, better search engine.
I call your keezmovies.com and raise you a fantasti.cc

[codyace]

I call your keezmovies.com and raise you a fantasti.cc

xnxx.com works good too :D

I miss Zilvia for reasons like this.......from retarded break questions to streaming porn site sharing :D....damn school! haha.

[projectRDM]

I call your keezmovies.com and raise you a fantasti.cc

tube8.com?

pornhub.com?

youporn.com?

My GF is going to kill me for dredging all this back up.....

[!Zar!]

Nah, it searches those sites as well. Not sure if it searches tube8 though.