PDA

View Full Version : Hesitation after 1-2 shift


LanceS13
07-09-2001, 09:11 AM
This usually happens when applying say 40-70% throttle.  I shift from 1st to 2nd and for about half a second nothing happens.  This also causes a fairly harsh 1-2 shift b/c the revs aren't where they should be when I release the clutch.  How can I fix this?

drifterx
07-09-2001, 04:27 PM
i dont know... learn to drive?
release the clutch slower and dont pound on your gas buddy!

LanceS13
07-10-2001, 07:31 AM
Oh, ok.  I must have just recently forgotten how.  :rolleyes:

I don't know about your car, but most cars I've driven accelerate as soon as you hit the gas.  And what do you mean don't pound on my gas?

cheater240
07-10-2001, 10:24 AM
I'm starting to get the feeling that this is the quality of comments we can expect from this board... driftrx ;p

My '91 manual has never had this problem, so I don't think its your driving style.  Either fuel or spark.  Since it is hard to check these while driving down the road making a 1-2 shift, I'd say its time to either buy a scan tool or take it to a shop to have the ECU codes read.  Probably a throttle position sensor or something like that.  I think www.240sx.org lists a way to read error codes without a scan tool.

West
07-10-2001, 01:52 PM
So you shift.... depress the clutch and are on the throttle and THEN it hesitates?

LanceS13
07-10-2001, 02:55 PM
Yes, just for like half a second.
It doesn't do it WOT and isn't noticeable when I'm barely accelerating.  But when I'm kinda on it and shifting around 4000-4500, it does something like this...
rrrrrRRRRRR :shift: mmmmrrrrRRRRRRRR :shift: rrrrrrrrRRRR....etc.