PDA

View Full Version : Z32 Brake Swap S13 HELP

S13RB25DETDRIFTER
11-05-2009, 10:08 PM
i got a 1inch master and everything bled but i loose the pressure in the pedal what can be the problem i bench bleed my master cylinder too i got steel lines and pads are new and rotors but the pedal is driving me insane i get the braking power at the end of the pedal
Dousan_PG
11-05-2009, 10:11 PM
are your calipers upside down?
did u bleed your calipers in the wrong order?
S13RB25DETDRIFTER
11-05-2009, 10:12 PM
how can they be upside down ? yeah i bled from Rear left to front Right
Dousan_PG
11-05-2009, 10:13 PM
z32 calipers can be upside down
bleeder screw needs to be at top not at bottom, or you'll always have air in them.
S13RB25DETDRIFTER
11-05-2009, 10:15 PM
thats probably it cus i think its on the bottom dang ima change them tomorrow
Dousan_PG
11-05-2009, 10:21 PM
yeah just flip them
i did the same thing years ago. its the most common error for z swaps. no biggie. you'll be fine after that.
S13RB25DETDRIFTER
11-05-2009, 10:24 PM
yeah because my pedal is all to the floor and im like why if i got a 1 inch master and bled why is it still doing that but thanks man for the info