PDA

View Full Version : Output Flange?

rhdgloria-y32
10-29-2009, 11:01 AM
How to you get the output flange out of the diff? And am i correct naz32 diff uses 30 spline output flanges same as q45/ Thanks.
UNISA JECS
10-29-2009, 11:02 AM
The NA Z32 uses 29 spline not 30 spline.

The Q45 uses 30 spline.

The TT Z32 uses 31 spline.
rhdgloria-y32
10-29-2009, 11:14 AM
who makes axles with 32.spline 5x1? can someone take my axle32 spline and change the 6x1 to a 5x1. thanks
UNISA JECS
10-29-2009, 11:40 AM
who makes axles with 32.spline 5x1? can someone take my axle32 spline and change the 6x1 to a 5x1. thanks

My above specs I laid out were for the Output Slide Flanges not axles sorry.

Tell me what you are tring to do and I can probably help you.
rhdgloria-y32
10-29-2009, 11:58 AM
what i have is my car y32. My spidergears broke in my vlsd. so i got a na z32 diff in my car and am trying to mate it with my axles. my axles r 32 spline and have 6x1 pattern. i still want to use my axles obiviously 32 spline but am stuck because i cant find any axles that are 32 spline. Talking to the drive shop and was thinking about having them mate my axles to the diff. or another option is mating my diff to my axles buy changing the output flange. but cant get my flanges out of my diff asuming my diff uses the q45 flange 30spline. wont work in the na diff? talked to mazwork and the said they can make flanges for me buy using all four flanges. does that help i know its a mess. didnt relize my axles were 32 spline. any input needed. no shit talkers welcome!
sidewaysonmy180
10-31-2009, 01:11 PM
first off i know nothing bout y32 as a matter of fact i actaully googled it just too find out its a gloria. haha!! but i do know alittle about the na z32 diff. i think what you might need to do is what i did.see i put that diff in my 240sx. the out puts dont match cuz the z has 5x1 and what you need is 6x1 right? if that makes sense.
rhdgloria-y32
11-04-2009, 01:57 PM
Yes i could do that but then i would have to use s14 axles and hub. But it makes no sense lowering from a 32 spline axle, hub! Thanks though
UNISA JECS
11-04-2009, 02:22 PM
I ran a Y32 3.69 VLSD in my KA-T

rhdgloria-y32 give me a call I can help you you got pm