PDA

View Full Version : Need to know what kind of engine this is?

mikulec240
10-28-2009, 07:10 PM
please call/text me at 1-224-425-1403
or pm me on here
here is a picture
http://i971.photobucket.com/albums/ae194/mikulec240/18672249_7X.jpg


please let me know asap its in a 1990 240sx i know its not a ka nor sr but let me know
ThatGuy
10-28-2009, 07:52 PM
You're an idiot.

You know it's a 1990 240sx, but you don't know what engine is in it.

Do you have any fucking comprehension on how to research something?

Posting stupid fucking questions on an international forum, is not researching.

How the fuck did you even survive to be 20 years old?
I mean, without someone there to remind you to breath, you should have passed out, never woke up, and saved us all some time a few years ago.
AJxr
10-28-2009, 07:54 PM
b16a dohc vtec
TheTimanator
10-28-2009, 07:54 PM
whats worse is he put his phone number.

Either way, it's a KA24E. Just your standard SOHC KA. :doh:
cc4usmc
10-28-2009, 08:07 PM
Someone put his number on a craigslist ad. A..personals ad.

Edit- Now that I think about it, that's probably what he want's because that's not his number. At least, I hope for his sake it isn't.
JEDIs13
10-28-2009, 08:11 PM
dumb question and an even dumber looking car
s chassis + racing stripes = MAD FAIL
HPballer76
10-28-2009, 08:12 PM
someone call and slap him through the phone.
Slammed180
10-28-2009, 09:58 PM
lol America fail.

Sorry, I had to.
jdm213
10-28-2009, 10:16 PM
Man this is so funny this isnt a ka, or sr.. hahahhaa
Homer_Simpson
10-28-2009, 10:34 PM
This guy is either an idiot or a TROLL. I vote ban!

Oh yeah, that's a warp reactor you've got there.
ryguy
10-28-2009, 10:54 PM
These guys are just giving you a hard time. That is definitely an SR20.
RodFarva
10-28-2009, 11:00 PM
Haz flux capacitor?
hOngsterr
10-28-2009, 11:03 PM
its a b16a

it came from the 2000 si coupes.
rare man!
usdm180sx
10-29-2009, 11:19 AM
You're an idiot.

You know it's a 1990 240sx, but you don't know what engine is in it.

Do you have any fucking comprehension on how to research something?

Posting stupid fucking questions on an international forum, is not researching.

How the fuck did you even survive to be 20 years old?
I mean, without someone there to remind you to breath, you should have passed out, never woke up, and saved us all some time a few years ago.

I'm surprised that you didn't lock this haha
DALAZ_68
10-29-2009, 11:24 AM
its an RB...lucky...


OP - on a serious note...get ur tubes tied...i cannot picture a world were someone like you gets to breed
JEDIs13
10-29-2009, 11:31 AM
its an RB...lucky...


OP - on a serious note...get ur tubes tied...i cannot picture a world were someone like you gets to breed


:bowrofl:

but your wrong dalaz.. that there is no rb.. its a 2jz


dudes got a filter coming off his VC but not one on his intake hahaha
:Owned:
Drift N Dragg
10-29-2009, 11:40 AM
Its a Bread Maker... Get some soughdough going....
boozels
10-29-2009, 11:44 AM
Wow how did you swap a v10 in there?
love the build
zaneithan
10-29-2009, 11:46 AM
some real serious engine tech going on here.
DALAZ_68
10-29-2009, 11:52 AM
but your wrong dalaz.. that there is no rb.. its a 2jz


fucking liar...

this is a 2Jay Z...this pic has NaZ though

http://i5.photobucket.com/albums/y162/whopper68/2jayZ.jpg
lazysk8er2
10-29-2009, 11:59 AM
i think someone should tell him what motor he has its not like this info has been around for 20 years
SleepR 240sx
10-29-2009, 12:14 PM
You've got an F20C right there man. Unique.
DJDANGER24
10-29-2009, 12:16 PM
fucking liar...

this is a 2Jay Z...this pic has NaZ though


ah that picture still makes me laugh.
MandTPhotography
10-29-2009, 12:37 PM
All aboard the failboat.
!Zar!
10-29-2009, 12:40 PM
Why is there an intake on the vent tube.

Yet no intake on the intake?

Better asked, why is this thread still open?
DJDANGER24
10-29-2009, 12:47 PM
Why is there an intake on the vent tube.

Yet no intake on the intake?

Better asked, why is this thread still open?good catch, i didnt notice that extreme fail
dr.klawn
10-29-2009, 02:41 PM
be careful with that 2JayZ motor!!! when u rev it, it sounds like big pimpin... but get it 2 close 2 Beyonce & ur Naz will spray all over the place!! jus a warning
yokotavia
10-29-2009, 06:12 PM
this thread is as much of a fail as those racing stripes and the ca18 in the engine bay.















HA
hegamiz
10-29-2009, 06:21 PM
hmmm... well at least he can post pic's, but yeah.... lol
DALAZ_68
10-29-2009, 06:46 PM
this thread is as much of a fail as those racing stripes and the ca18 in the engine bay.




hey!...hey!... not cool...not...cool...:hahano:
Wake
10-29-2009, 07:05 PM
I think barry left it open so we could flame,

cmon zilvia, you guys can do better than this......
FaLKoN240
10-29-2009, 07:16 PM
hey!...hey!... not cool...not...cool...:hahano:

Truth hurts.
let5l1de
10-29-2009, 07:35 PM
I think barry left it open so we could flame,

cmon zilvia, you guys can do better than this......

And after all of us flame on this foolio for posting such a fck'n dumb question without searching (or a brain for that matter), the mods can flame on us for not acting like a Premie? :nono:

Please close this thread as it contains no good zilvia content whatsoever.

If this stays open any longer, we might as well start using the IBTL bullshit too...

~m
ranger240
10-29-2009, 08:02 PM
this is legendary...

congrats man.. your car has the same engine as this car

http://www.sdsefi.com/collin.jpg

YOU HAVE A RACE CAR ENGINE!!
YoungGun
10-29-2009, 08:06 PM
How much boost are you running bro?
g-via
10-29-2009, 08:19 PM
lurk moarrrrr
Sileighty_85
10-29-2009, 08:20 PM
http://i73.photobucket.com/albums/i235/Neil_85/Misc/untitled-1.jpg
Wake
10-29-2009, 09:00 PM
by far the best possible response above

all responses but that should be deleted and it should be stickied and moved to a "best of zilvia" thread HAHA

good lulz there
FairLady_JDM
10-29-2009, 09:04 PM
its a 13b rotary.

Im 100% sure of it.

Trust me, I work at mcdonalds.
roboticnissan
10-29-2009, 09:15 PM
thats definatly a sohc motor for the 89 to 90 s13 chassis i dont know why all you guys think its a ca sr or rb or what ever other motors you guys think it is. man zilvia is failing.
yokotavia
10-29-2009, 09:18 PM
a response like the one above makes this thread even more fail.


hahahahahahha

DUDE WE KNOW ITS A SINGLE CAM KA.

fuck
I LUV MY S13
10-29-2009, 09:20 PM
OH MY GOD....bro do you even know what a ka is??!?....i have never thought i'd see a thread like this

well its a Single Over Head Cam KA24E
9s13Coupe3SX
10-29-2009, 09:37 PM
brah you got a mopar engine, the stripes on your car gave the unknown engine away.
sidedrifts13
10-29-2009, 09:57 PM
Lock this up perros
projectRDM
10-29-2009, 10:19 PM
How in hell did I miss this?

How in hell it is on the second page already?

How in hell is the OP still living?

Kid has been trying to buy a car all year, look at his other posts, he's missed out on S14s and now settles on this piece of shit. Sad.
Slammed Assassin
10-29-2009, 10:29 PM
complete failure.
Wake
10-29-2009, 10:36 PM
Hey there was a time when I didnt know that there were SOHC and DOHC 240's.....

but that was like '98 so I guess I kinda have an excuse.
Souljahzs13
10-30-2009, 01:25 AM
ROFL!! This must have been one of the funniest trolling without getting pinked hahahaa...
blu808
10-30-2009, 01:48 AM
I am surprised Barry did not lock this. I wonder if this kid forgot to breath and died.
ThatGuy
10-30-2009, 09:33 AM
Give me a fucking break.

You guys bitch everytime something completely pointless is locked up.
But the one time I leave something open, because some idiot NEEDS a little tough love, you all start bitching that I didn't close it.

Make up your mind. :lockd: