PDA

View Full Version : Turbo Of Choice


lodder
05-10-2003, 08:09 PM
I need a turbo that will be good for over 400hp. I still have to get supporting mods, like an afr, injectors, vpc, etc, but I would like to know what will be good for drag purposes. I don't plan to build the bottom end yet. My friend is running is running a turbonetics T3/T4 turgo with a .50 trim compressor and a .63 stage 3 turbine with the stock piston which I believe are 7:6:? He thinks I should run an .82 turbine for the stock 8:5:1 in the sr. What do you think?

lodder.

ipt
05-11-2003, 09:12 PM
STAY AWAY from the .82 turbine housing. it will be a laggy beast!! What your friend is run is a great combination. If I were you I would even think about going to a .48 turbine housing. it might hurt you top end a very little bit, but the better spool and throttle response will more than make up for it.

Jeff240sx
05-11-2003, 09:18 PM
Yeesh... .48 intake ar is too small for the power he wants. .63 is optimal, as is the .82 ar exhaust. Think 400hp.
-Jeff

ipt
05-11-2003, 09:26 PM
The .48 is the A/R on the turbine housing (Hot side) there are alot of people out there that will say that is too small a housing, but I have seen over 500whp on 2.0L motors and they were using a .48 A/R turbine housing. They had GREAT throttle response.

lodder
05-12-2003, 04:25 PM
Thanks for the help. I think I'm on track now!