Help me identify these RB plugs!

[Zacho]

I don't have my harness with me as my car is parked an hour from my house and I would be glad if someone could help me identify these plugs as I won't see the harness for about two weeks. The first one(s) I really have no idea. Both are right next to each other on the harness, only one pin inside.They were not in use on my car. I *think* the second one is something with hicas, not sure though.

Thanks guys!

Plug(s) #1
http://i28.photobucket.com/albums/c228/thecordillera/DSC00123.jpg
http://i28.photobucket.com/albums/c228/thecordillera/DSC00124.jpg
Plug #2
http://i28.photobucket.com/albums/c228/thecordillera/DSC00128.jpg
http://i28.photobucket.com/albums/c228/thecordillera/DSC00125.jpg

[Zacho]

I will add, this is a rb25det series 1 harness.

[Sileighty_85]

#1's are the knock Sensors I belive, they are located under the intake manifold between cylinder 1-2 and 5-6

#2's Looks like the A/C low pressure sensor on the filter drier

[Zacho]

Hmm, those two weren't even plugged in.

And yes, I have confirmed thats what #2 plug is thanks!

[Paulpen]

They aint knock sensors and they dont connect to anything.

They are readout plugs for the tacho and something else so justleave them and tape them up :)

[Zacho]

Yes, for anyone who reads this thread later on I have figured they are "test pins" and don't connect to anything, just tuck em into the harness.

[Sileighty_85]

opps my bad, they looked like the same style as the Knocks but if i remember they were green? Its been awhile