SR20DET CAS Wiring?

[Propaganda]

I need to rewire my CAS and only have the S14 FSM. I know:
http://i26.tinypic.com/2m85cu0.jpg


1 B - GND
2 B/W - 22/30
3 B - 31/40
4 W - ?????

I need to know where #4 is on an E5 [Early S13 Blacktop aka non Type-X/J4]

[Five_5Zigen_4]

Check here: http://www.240sxforums.com/forums/sr20det-engines/118010-ecu-pinouts.html

[edit] Just looked through those and it doesn't list them...strange...hope someone who knows chimes in o_O

[Propaganda]

Check here: SR20DET: ECU Pinouts - 240SX Forums (http://www.240sxforums.com/forums/sr20det-engines/118010-ecu-pinouts.html)

[edit] Just looked through those and it doesn't list them...strange...hope someone who knows chimes in o_O

Yeah... I cover my bases.. I've already looked there. I've been thinking it over and looking at the S14 SR pin out and CAS wiring from the FSM and it seems that the wires go straight to the ECU of the same colors.

So that would be 38/47.. Any reason to recant this?

[Five_5Zigen_4]

I'd be careful, because if its an s13, its most likely a different pin-out...that and with them being white, its hard to tell because there are alot of white wires in that connector. When I get home tonight I'll try to meter out mine and figure out what ones go where for you.

Till then, good luck!!

[Propaganda]

Whoops.. I numbered those wrong.. I meant:

1 - B - GND
2 - B/W - ??
3 - B - 22/30
4 - W - 31/40

2 - B/W goes 38/47. I started her up and it was fine

[Five_5Zigen_4]

Whoops.. I numbered those wrong.. I meant:

1 - B - GND
2 - B/W - ??
3 - B - 22/30
4 - W - 31/40

2 - B/W goes 38/47. I started her up and it was fine

Ahhhh...nice!! Glad you got it sorted out!