PDA

View Full Version : tranny problems


ocska04
04-02-2009, 09:29 PM
Ok so i have a 1996 s14 with an s14 sr... i have blitz twin disc clutch kit on it and well the throwout bearing gave up on me. So i changed the throwout bearing (i got it from west covina nissan) along with the slave and master cylinder. So i take it out for a test drive and all and about 25 miles of driving it i feel the tranny slip around 70mph and then the clutch lost complete pressure... so i swapped out the master got it from autozone and the slave got it from west co. nissan (nismo slave) now regained pressure but clucth only has pressure about 3/4 of the way down only but it wont go into any gear at all. WHAT CAN THIS BE? any help would work the system is bled and has pressure

fast-datsun
04-03-2009, 02:19 PM
Most twin disk clutches take a special length sleeve for the throw out bearing too set the correct lenght of FREE play in the mechanical linkage..Nissan has 24 diferent lengths of sleeves. there are also an adjustment at the pedal to clutch master cyl that need correct adjustment..