PDA

View Full Version : gt 28 oil lines?


ka24det92
03-04-2009, 07:27 AM
So here my delema i bought a set of oil lines front a guy on a forum. When i got the package it was just that the lines there was no fittings for the block or turbo. I dont want to buy a new set of line just so i can have the fitting. So if some one could tell me what the part numbers or the sizes i need for the block and turbo, so i can buy them seperate that would be very helpful thanks for the help.

ka24det92
03-04-2009, 11:09 AM
Anybody?????????????

krazycaron
03-04-2009, 12:15 PM
well it depends on what turbo your trying to run...... and also what size the lines are.....most likely the lines are -6 i have to look at mine...and ill get back to you

ka24det92
03-04-2009, 12:56 PM
im running a 2871r with what look like circuit sport lines

drifter_for_life06
03-06-2009, 04:19 AM
i personally dont know how to help ya, but if they look like CS lines...try getting ahold of CS and asking them

GSXRJJordan
03-06-2009, 04:29 AM
M14x1.50 are the water line fittings into the turbo, same as T25/28. I'm assuming you've got -6an lines? Any place will have M14x1.50 to -6an adapters, just look under "metric fittings".

For the oil line, most of us run -3an lines with a restrictor - -3 size Oil inlet fitting for GT28/30/35R with built-in restrictor: atpturbo.com (http://www.atpturbo.com/Merchant2/merchant.mvc?Screen=PROD&Store_Code=tp&Product_Code=ATP-OIL-036&Category_Code=BCS) is the most popular one.

For oil drain, use a OEM GT28R oil drain from Nissan, or get some heater hose (dont remember thickness) and make your own with the stock drain, but be careful of kinks.