PDA

View Full Version : S13 to RB25 build - now with ghetto frame bending technique!


eyehate
02-11-2009, 05:54 PM
Since i got this car last year, i have held off the urge to swap something into it. Everyone else had Sr's and i had my shitty sohc KA that made a whopping 94 horse up here at 5,000 feet above sea level. Instead of swapping, I spent the last year concentrating on just driving. Learning the car, technique, lines, and learning to drift.

as she sat for the last year:

http://img.photobucket.com/albums/v280/terrilildevil/cars/CRW_5873.jpg

Season is over (at least in NM), and i think i am ready to step up to power. Time to build. Started in november of 08.

teh rb
http://img.photobucket.com/albums/v280/terrilildevil/s13/2935790927_7e94f8d17c_o.jpg

too many people, not enough hands lol, awesome shot nonetheless, and thanks to those that helped pull the worlds ugliest motor out.
http://img.photobucket.com/albums/v280/terrilildevil/s13/2936670074_341a42b5b4_o.jpg

out with the dash
http://img.photobucket.com/albums/v280/terrilildevil/s13/IMG00673.jpg

started sanding
http://img.photobucket.com/albums/v280/terrilildevil/s13/IMG00676.jpg

for some reason, the rad. support was bondo'd together, and exploded when we tried to straighten her out.
http://img.photobucket.com/albums/v280/terrilildevil/s13/IMG00677.jpg

how we straightened the frame. unsafe ghetto action is awesome on a sunday.
http://i228.photobucket.com/albums/ee61/rotorracing/DSC02045.jpg

the hack job some may consider a repair (PO)
http://img.photobucket.com/albums/v280/terrilildevil/s13/IMG00678.jpg

more carnage
http://img.photobucket.com/albums/v280/terrilildevil/s13/IMG00679.jpg

rust rust rust :(
http://img.photobucket.com/albums/v280/terrilildevil/s13/IMG00680.jpg

http://img.photobucket.com/albums/v280/terrilildevil/s13/IMG00682.jpg

engine going in from the bottom
http://i228.photobucket.com/albums/ee61/rotorracing/dans%20240/DSC02089.jpg

cock size? maybe
http://i228.photobucket.com/albums/ee61/rotorracing/dans%20240/DSC02100.jpg

custom ish
http://i228.photobucket.com/albums/ee61/rotorracing/dans%20240/DSC02098.jpg

motor mounts done, engine in
http://i228.photobucket.com/albums/ee61/rotorracing/dans%20240/DSC02102.jpg

had to make a trans mount (more bracing on them to come later)
http://i228.photobucket.com/albums/ee61/rotorracing/dans%20240/DSC02110.jpg

http://i228.photobucket.com/albums/ee61/rotorracing/dans%20240/DSC02114.jpg

http://i228.photobucket.com/albums/ee61/rotorracing/dans%20240/DSC02116.jpg

Busted ass rad support = lame
http://i228.photobucket.com/albums/ee61/rotorracing/dans%20240/DSC02140.jpg

http://www.patrickmoberg.com/website/images/illustration/public/regular/patrickmoberg_illustration_28_450px.jpg

http://i228.photobucket.com/albums/ee61/rotorracing/dans%20240/DSC02148.jpg

temp reassemble of the front end was needed
http://i228.photobucket.com/albums/ee61/rotorracing/dans%20240/DSC02152.jpg

begin fab!
http://i228.photobucket.com/albums/ee61/rotorracing/dans%20240/DSC02155.jpg

http://i228.photobucket.com/albums/ee61/rotorracing/dans%20240/DSC02156.jpg

http://i228.photobucket.com/albums/ee61/rotorracing/dans%20240/DSC02158.jpg

http://i228.photobucket.com/albums/ee61/rotorracing/dans%20240/DSC02162.jpg

how to make amazing:

step 1 use sharpe to make strange marks
http://i228.photobucket.com/albums/ee61/rotorracing/dans%20240/DSC02163.jpg

step 2 drill said marks
http://i228.photobucket.com/albums/ee61/rotorracing/dans%20240/DSC02164.jpg

step 3 profit...
http://i228.photobucket.com/albums/ee61/rotorracing/dans%20240/DSC02170.jpg

http://i228.photobucket.com/albums/ee61/rotorracing/dans%20240/DSC02169.jpg

http://i228.photobucket.com/albums/ee61/rotorracing/dans%20240/DSC02168.jpg

http://i228.photobucket.com/albums/ee61/rotorracing/dans%20240/DSC02190.jpg

http://i228.photobucket.com/albums/ee61/rotorracing/dans%20240/DSC02191.jpg

headlight brackets done.
http://i228.photobucket.com/albums/ee61/rotorracing/dans%20240/DSC02195.jpg

http://i228.photobucket.com/albums/ee61/rotorracing/dans%20240/DSC02196.jpg


(update as of 2/08/09)
Now I have until March 7th to finish. Shit.


http://i228.photobucket.com/albums/ee61/rotorracing/dans%20240/DSC02627.jpg

http://i228.photobucket.com/albums/ee61/rotorracing/dans%20240/DSC02629.jpg

My intercooler is 1000% more JDM than anyone else's. Why? It fucking says so goddammit.
http://i228.photobucket.com/albums/ee61/rotorracing/dans%20240/DSC02628.jpg

http://i228.photobucket.com/albums/ee61/rotorracing/dans%20240/DSC02633.jpg

http://i228.photobucket.com/albums/ee61/rotorracing/dans%20240/DSC02630.jpg

http://i228.photobucket.com/albums/ee61/rotorracing/dans%20240/DSC02635.jpg

http://i228.photobucket.com/albums/ee61/rotorracing/dans%20240/DSC02634.jpg

Finished sanding, primer this weekend. Started wiring. more to come.

slider2828
02-11-2009, 05:59 PM
wow pics = fail

Woops just fixed lol

eyehate
02-11-2009, 06:02 PM
i'm that fast ;)

s13.dark1
02-11-2009, 06:06 PM
wow im surprised you didnt ditch it

FaLKoN240
02-11-2009, 07:34 PM
That chassis is pretty fucked up, but it appears that it is in more than capable hands.

The process pics had me thinking "Oh fuck, this is gonna turn into a piece of shit with a cool motor..." but now that I see you can do dimples and shit, and your work looks good I've reversed that idea.

Are you gonna paint the engine bay or are you gonna say something like "FORM OVER FUNCTION! I can't spend money blah blah *cry*."

eyehate
02-11-2009, 07:54 PM
we will for sure be painting the entire car... engine bay included ;)

The rest of the car minus the front end is pretty damn straight.

Primer is going to be shot this friday, so hopefully paint next weekend.

The Chad
02-11-2009, 08:33 PM
I bow to your welding skills (as I still suck at clean welds) , and so should your S13. It owes you its life. Looks good bud. GL with the completion!

Teambadrun
02-11-2009, 08:33 PM
Haha cool stuff man.

there is lots of bolt on stuff that fits without making it custom fabrication, but i guess nothing hurts, like making your transmission mount, and other things


looks good!

ZX88
02-11-2009, 08:44 PM
damn nice fab work.

TheS14project
02-11-2009, 09:29 PM
Looks good, cant wait to see more.

Slammed Assassin
02-11-2009, 09:41 PM
lookin' pretty good so far!!

eyehate
02-11-2009, 09:42 PM
andy and I have a shop called racefab, he is a fab god :) I am still learning.

peep his personal project here. (http://www.rx7club.com/showthread.php?t=783006)

babowc
02-11-2009, 10:28 PM
did you use TIG or MIG on those tranny mounts?

1989rps13
02-11-2009, 10:37 PM
damn that looks sweet

yurisfriendevan
02-12-2009, 09:12 AM
That core support looks similar to the work done on the fc. I dig.

onepuff
02-12-2009, 10:00 AM
Awesome work man. Looking forward to more progress.

andyv316
02-12-2009, 10:09 AM
Damn good work, that looks great.

Om1kron
02-12-2009, 10:13 AM
haha I saw this piece of shit on zip-tied... I still sit mezmorized that such good fab work was done on such a bad chassis, but it's not like you're trotting around your newborns with it so cheers to you for a bad ass job.

eyehate
02-12-2009, 06:02 PM
^ lol damn straight. Like CJ said, first time it hits 1 bar, shits gonna go supernova and kill everyone in a 1km radius.


oh and the trans mount was mig'd :) Only tig so far is on intake and boost pipe.

bruceguy
02-12-2009, 09:08 PM
respect to your fab work, nice to have the shop and tools.

s13dan
02-12-2009, 09:19 PM
Im loving the front end work. Looks pretty good, keep us updated!

opponheimer
02-13-2009, 12:01 PM
Having your intercooler slanted like that is not a good idea at all. I had that on an s13 with a 4-row IC, and had overheating issues even with a taurus fan on low speed. My HG was fine, no water in oil, and had no leaks, straightened my FMIC out and air could finally flow a straight path to my radiator. Car neve roverheated again.



Just some friendly advice. Nice custom rad support... you should have modded it further out so you could run Puller fans.... Pusher fans are gay and inefficient. Also, where did you get your intake manifold?

eyehate
02-16-2009, 03:55 PM
thanks for the input! we may straighten her out, i guess when testing and tuning we will find out quickly.

Its one that gavster made using the stock manifold.

Pm me if you want something similar :)

eyehate
03-01-2009, 04:34 PM
moar pics!

top view of the boooooth
http://img.photobucket.com/albums/v280/terrilildevil/s13/1235874609578.jpg

http://img.photobucket.com/albums/v280/terrilildevil/s13/1235889027284.jpg

http://img.photobucket.com/albums/v280/terrilildevil/s13/1235889011257.jpg

http://img.photobucket.com/albums/v280/terrilildevil/s13/1235889003501.jpg

http://img.photobucket.com/albums/v280/terrilildevil/s13/1235874592007.jpg

http://img.photobucket.com/albums/v280/terrilildevil/s13/1235857729016.jpg

http://img.photobucket.com/albums/v280/terrilildevil/s13/1235857699199.jpg

yurisfriendevan
03-01-2009, 05:24 PM
Night and Day! good progress keep it up

Om1kron
03-01-2009, 06:50 PM
what happened to all of the gusset plates?

eyehate
03-01-2009, 07:12 PM
we haven't welded them in yet, in case we need to make minor adjustments to the support. now that everything is painted we can assemble the front end to make sure everything fits, then remove motor and paint!

eyehate
04-23-2009, 05:35 PM
Update, new oil pan and pick up, radiator and intercooler modded.'
font end and wiring coming together.

http://i228.photobucket.com/albums/ee61/rotorracing/rb25%20SX/DSC02803.jpg

http://i228.photobucket.com/albums/ee61/rotorracing/rb25%20SX/DSC02802.jpg

http://i228.photobucket.com/albums/ee61/rotorracing/dans%20240/DSC02925.jpg

http://i228.photobucket.com/albums/ee61/rotorracing/dans%20240/DSC02926.jpg

http://i228.photobucket.com/albums/ee61/rotorracing/dans%20240/DSC02928.jpg

http://i228.photobucket.com/albums/ee61/rotorracing/dans%20240/DSC02932.jpg

http://i228.photobucket.com/albums/ee61/rotorracing/dans%20240/DSC02933.jpg

http://i228.photobucket.com/albums/ee61/rotorracing/dans%20240/DSC02936.jpg

http://i228.photobucket.com/albums/ee61/rotorracing/dans%20240/DSC02946.jpg

nsn240
04-23-2009, 06:56 PM
saw this on ziptied.. looks really good man! diggin the rad support and dimples

arkive43
04-23-2009, 08:54 PM
nice.....is that a gecko!!!

eyehate
04-30-2009, 10:10 PM
octopus lol still needs the suction cups painted on.

update... hopefully she runs tomorrow!

ch ch ch ch changessssss

had a coolant leak!!!
iac would of hit the hood so andy clocked it. manifold was made for a s14 not s13

http://i228.photobucket.com/albums/ee61/rotorracing/dans%20240/DSC02987.jpg

http://i228.photobucket.com/albums/ee61/rotorracing/dans%20240/DSC02979.jpg

http://i228.photobucket.com/albums/ee61/rotorracing/dans%20240/DSC02980.jpg

http://i228.photobucket.com/albums/ee61/rotorracing/dans%20240/DSC02986.jpg

http://i228.photobucket.com/albums/ee61/rotorracing/dans%20240/DSC02982.jpg

http://i228.photobucket.com/albums/ee61/rotorracing/dans%20240/DSC02985.jpg

http://i228.photobucket.com/albums/ee61/rotorracing/dans%20240/DSC02988.jpg

http://i228.photobucket.com/albums/ee61/rotorracing/dans%20240/DSC02989.jpg

moar

http://i228.photobucket.com/albums/ee61/rotorracing/dans%20240/DSC03002.jpg

http://i228.photobucket.com/albums/ee61/rotorracing/dans%20240/DSC03003.jpg

http://i228.photobucket.com/albums/ee61/rotorracing/dans%20240/DSC03004.jpg

http://i228.photobucket.com/albums/ee61/rotorracing/dans%20240/DSC03005.jpg

http://i228.photobucket.com/albums/ee61/rotorracing/dans%20240/DSC03007.jpg

http://i228.photobucket.com/albums/ee61/rotorracing/dans%20240/racefabrb25.jpg

xBlastoisex
04-30-2009, 10:26 PM
looks good man, keep it up

eyehate
05-01-2009, 06:29 AM
hopefully we driver her tomorrow

Teambadrun
05-02-2009, 08:31 AM
good shit dude. send some videos or pics of this bad boy!

eyehate
05-03-2009, 03:45 PM
YouTube - dans rb25 rev (http://www.youtube.com/watch?v=HS85xOdh5No)

mewantkouki
05-03-2009, 08:53 PM
If you leave that wastegate line ziptied to the ss turbo oil feed line it is going to melt sooner or later.

eyehate
05-10-2009, 04:35 AM
ziptie clipped ;)

cxlumpy
05-10-2009, 09:13 AM
looks good! keep up the work.

GSXRJJordan
05-16-2009, 02:53 PM
Great save, good fab work. I dig it.

eyehate
05-25-2009, 02:34 PM
same car, new motor, new paint, new kit, new vid

http://px5.sfstatic.com/thumbs/0000/24/61/684216.jpg (http://videos.streetfire.net/video/racefab-rb25-s13-drifting_684216.htm?ref=bead5e54-28dd-4425-9009-2205d41ffa9a)racefab+rb25+s13+drifting+number+2 (http://videos.streetfire.net/video/racefab-rb25-s13-drifting_684216.htm?ref=bead5e54-28dd-4425-9009-2205d41ffa9a)

pics

http://farm4.static.flickr.com/3605/3561214016_ac0dc060f2.jpg

http://farm3.static.flickr.com/2431/3560397793_e250de809a.jpg

http://farm3.static.flickr.com/2455/3560397689_6773a7950d.jpg

zerodameaon
09-26-2009, 04:07 PM
Lots of custom work and it looks good. Keep it up.

beats13bob
09-30-2009, 03:13 PM
Great work! wow!

I have to fix my rad support as well cause i hit a building :Ownedd:

ill be putting my RB in this winter and hoping its ready for next season.

S14_Kouki
09-30-2009, 03:52 PM
looks great man good work

eyehate
10-13-2009, 10:48 PM
new vid

RSW Driftcross vado HD test on Vimeo (http://vimeo.com/7049185)

Chernobyl
10-13-2009, 10:56 PM
Awesome!

I'm pretty bummed I missed this event, but I didn't want to drive down alone.

How much power is your car making these days?

eyehate
10-14-2009, 04:38 PM
voted for you car in that coilover contest btw.

she put down 235 on 5psi... maybe someday ill turn up the boost, who knows

Chernobyl
10-15-2009, 07:27 AM
Is that corrected for altitude?

Thanks for the vote man.

rican_nick
10-15-2009, 01:22 PM
hey clean your PM's. I tried replying to ya.

tricky_ab
10-15-2009, 04:01 PM
Great work you did on your ride...

eyehate
02-03-2010, 04:57 PM
^Thanks!!

And another new vid from deming, nm


YouTube - Arroyo Seco - Dan.wmv (http://www.youtube.com/watch?v=Jq6j5-QbSVw)

RB24_S14
02-03-2010, 05:20 PM
Didnt think it was going to end up like this. Good job.

eyehate
04-08-2010, 05:11 PM
few more

Tune and moar boost.
http://www.youtube.c...h?v=ISFkt-nf35c (http://www.youtube.com/watch?v=ISFkt-nf35c)

Friends LS-1 FD
http://www.youtube.c...h?v=BD0_KObbHX4 (http://www.youtube.com/watch?v=BD0_KObbHX4)

tricky_ab
04-08-2010, 09:40 PM
It sure looks like you're having fun! :)

I LUV MY S13
04-08-2010, 09:53 PM
it looked like shit in the beginning, but good turnout...congrats

eyehate
04-28-2010, 01:32 PM
Having a blast, more vids! and a pic that made the local newspaper :)

http://img.photobucket.com/albums/v280/terrilildevil/clip_image002-1.jpg

Keep drifting fun
KEEP DRIFTING FUN abq on Vimeo (http://www.vimeo.com/11155540)

Media day
sandia drift 4-26-10 on Vimeo (http://www.vimeo.com/11255181)

OBEEWON
04-28-2010, 02:24 PM
Is that EWG fire? If so HOT.

eyehate
04-28-2010, 03:54 PM
yessir! lol

GSXRJJordan
04-28-2010, 04:04 PM
Killing it! Well done, good driving, cool vids.

Can't wait for more Keep Drifting Fun stuff.

Aki180sx
04-28-2010, 04:15 PM
Turned out more than well enough to serve its purpose great job!

Most people would have just thrown it away with that kind of damage but your apparently not most people.

omgRWDgoodness!
04-28-2010, 04:37 PM
http://i179.photobucket.com/albums/w302/P_Toms/blownaway.jpg


Also, do you know by any chance what motor that blue MR2 had that was lifted above your car in that one pic? Didn't look like a 3S-GTE...

eyehate
07-19-2010, 10:01 PM
It was a turbo v6 our of some other toyota... ended up being pretty fast lol.

moar vids

Drift Practice July 9th on Vimeo (http://vimeo.com/13398553) compilation of a 35 dollar practice night we had

Sandia Drift Series - Dan Brockett 2 on Vimeo (http://vimeo.com/12601614) - incar footage

J~TIN
10-18-2010, 09:41 PM
very nice work, safe to say this s13s in good hands

bb4_96
10-19-2010, 07:18 AM
phenominal build.

eyehate
02-28-2011, 09:23 PM
Major major updates. Wide body, fab, cage and more here:http://www.danbrockettdrift.blogspot.com

Teaser pics:

https://lh5.googleusercontent.com/-J51knJQ8p60/TWnZ1t2huhI/AAAAAAAAAMM/KIviiNO-lXQ/s1600/IMG_20110226_200703.jpg

https://lh4.googleusercontent.com/-zdUH3QWLFu8/TWixcjhJtqI/AAAAAAAAAK8/LYfhREK_4ZY/s1600/IMG_20110225_163217.jpg

kraven9
02-28-2011, 10:18 PM
When I clicked this... I was like oh boy this isn't going to end good but it did. That's some awesome fab work. Keep doing it man.

eyehate
03-01-2011, 11:03 AM
thanks!!! Should be going into paint today

singlecamslam
03-01-2011, 02:19 PM
fellow rb25 owner! YES. Do you feel the extra weight on the front from the motor? I just got mine going after an sr20.

AGNT84
03-01-2011, 08:27 PM
nice work...its looking good...

eyehate
03-01-2011, 09:07 PM
fellow rb25 owner! YES. Do you feel the extra weight on the front from the motor? I just got mine going after an sr20.

a bit, as its one hell of a heavy motor. I will say with sticky tires up front, it felt way more planted than with the SOHC. Run some stiffer springs up front and you will be golden :)

11155540

03-02-2011, 02:50 AM
Verry sick!

singlecamslam
03-02-2011, 11:53 AM
I actually like the added weight. It makes the ass stick out longer when letting off the throttle, makes high speed transitions nice.

dsc4130
03-02-2011, 11:30 PM
What size wheels are those on your test fit?

eyehate
03-03-2011, 09:40 PM
rota grids, 18x10 +20 with 20mm spacers :)

dsc4130
03-03-2011, 10:06 PM
Hmmm thank you cause I have the same kit for a hatch and I was thinking 10.5 with a 50mm spacer would do the trick thanks

eyehate
03-07-2011, 06:25 AM
we will be playing with offset, so ill keep the thread updated :) goes into paint today!

https://lh3.googleusercontent.com/-sGaGtI2xEx4/TXQWfsewnuI/AAAAAAAAAQY/W98kc4aXXoc/s1600/IMG_20110306_143402.jpg

Om1kron
03-07-2011, 07:13 AM
legit ass paint booth.

eyehate
03-07-2011, 08:58 AM
Truth! Car Crafters doesn't fuck around.

eyehate
03-18-2011, 01:03 AM
Moar.

https://lh6.googleusercontent.com/-4-ipWeJ9rfc/TYFhxHEUSPI/AAAAAAAAAUA/BPJTXqsbpvM/s1600/Dan-2.jpg

https://lh3.googleusercontent.com/-pouoK7O7FEY/TYFhyWlU_5I/AAAAAAAAAUI/ovzqa0xZbm4/s1600/Dan-3.jpg

More here (http://danbrockettdrift.blogspot.com/)

4DOOR_LIFE
03-18-2011, 03:26 AM
Fuuuucck man looking goood.

I'm lovin this build more and more.

rat240
03-18-2011, 03:34 AM
^^^^^^^^^^ dont buy wons vert

ElmStormer
03-18-2011, 11:25 AM
Big turn around! Great job sir!

eyehate
03-18-2011, 08:40 PM
getting there. still having some major wiring issues.

eklips3
03-19-2011, 02:42 AM
wow , doin it all legit eh ?

respect man, you built it And you drive it like it should be drivin

HPKMotorsports3
03-20-2011, 07:12 PM
great work man... props on the resurrection

mk42low
03-22-2011, 04:35 PM
really diggin it i love white coupes and the rb equalls 8======D

eyehate
03-22-2011, 06:25 PM
https://lh4.googleusercontent.com/-DJ7I28Oj5ng/TYk8uYF5_FI/AAAAAAAAAVE/E3BT2ogElKk/s1600/IMG_20110322_162912.jpg

aoiken3
03-22-2011, 11:57 PM
what a beast!!

josephin510
03-23-2011, 02:18 AM
Beast just beast you should make rad supports in small batches and sell them.:cool: What kind of wiring probs?

eyehate
03-23-2011, 12:34 PM
lol rad supports would be pretty tough lol. especially since my frame isnt so straight ;)

Having issues with the AEM not liking the way the car is wired, sent the AEM back, and need to re-pin my ECU plug, making sure the connections are going where they are supposed to :(

all this and i have an event im supposed to be at in cali on saturday

kraven9
03-23-2011, 05:30 PM
Nice update. Paint is looking real fresh.

josephin510
03-23-2011, 08:33 PM
lol rad supports would be pretty tough lol. especially since my frame isnt so straight ;)

all this and i have an event im supposed to be at in cali on saturday
My frame rails lay flat to the floor boards. :p What you know about drifting while driving straight/normal/seep limit.

I hope you get the wiring done in time man..

rican_nick
04-10-2011, 07:55 AM
WOW is all i can say man. Minty is no longer Mint Minty... its Fresh Mint now.. haha

I love that you were able to save this car!!

burninskulls0911
04-10-2011, 08:38 AM
sweet car!
it looks like you have some sweet facilities to your disposal!

kalypso123
04-10-2011, 08:45 AM
this build is superb.

but you still need some proper wheels >>

http://img199.auctions.yahoo.co.jp/users/2/1/0/7/akr2008gt-img600x450-1301297654drpwz594126.jpg

eyehate
04-13-2011, 12:47 AM
wiring is done :) Vid and pics here (http://danbrockettdrift.blogspot.com/2011/04/it-lives.html)

Holy crap... Such a relief to hear it fire up again!

Removed 60+ lbs of wire in the process
http://1.bp.blogspot.com/-R5SbTs6Kx_Q/TaPf5pR85LI/AAAAAAAAAaU/6wI6d2FqX7M/s1600/IMG_20110405_160330.jpg

As for wheels, I am too damn broke from the build to buy much of anything right now... maybe in a few months!

eyehate
05-03-2011, 07:05 PM
Just drift top drift round 2 writeup and pics!!! (http://danbrockettdrift.blogspot.com/2011/05/just-drift-topdrift-rd-2-horse-thief.html)

http://2.bp.blogspot.com/-wlV61O50nkA/TcCCMjKo0uI/AAAAAAAAAdk/qdHHpsW1LPc/s1600/normal_IMG_5070.jpg

eyehate
06-14-2011, 01:52 PM
Vegas drift round 2 write up pics, and a video (http://danbrockettdrift.blogspot.com/2011/06/vegasdrift-round-2-road-trip-vegas.html)

holler.

Preview

http://kylepope.smugmug.com/Other/Vegas-Pro-Am/i-PMTLrxk/0/L/VegasProAm-689-L.jpg

eyehate
06-17-2011, 12:12 AM
Ow1CeUSjKJE

kornmanz
06-17-2011, 12:54 AM
I should take my 240 out to one of the events just to chat with you other 240 owners. Not many of us here in SF. The modlist on mine is extensive and could be a great track drifter but I daily it so drifting it is out of the question for me unfortunately.

eyehate
06-17-2011, 03:29 AM
come out and hang, next event is 25th of this month :)

kornmanz
06-19-2011, 02:13 AM
I'll keep that in mind I think I'll stop by. I keep hearing about the sick 240s out there in Alb. Here's a few pics from my build:

eyehate
06-27-2011, 04:46 AM
looks good, now come slide!

terry_240sx
07-09-2011, 12:37 PM
nice build man!
i hope i can get on this level eventually lol

sulik
07-11-2011, 06:00 AM
What type of inlet manifold are you using?

alexanderig
07-11-2011, 07:06 AM
looks good keep it up.

eyehate
07-18-2011, 04:53 AM
Thanks guys :)

The intake manifold is a hacked up stock one. we used the stock runners with a custom plenum. Seems to work pretty damn well :)

eyehate
08-10-2011, 01:22 PM
Blog has been updated with Topdrift round 3 write up / pics/ vids!!! (http://www.danbrockettdrift.com)

http://1.bp.blogspot.com/-GE118ElfX48/TkHRnwPitGI/AAAAAAAAAmE/m8kfHTZ24AI/s640/IMG_2313.jpg (http://www.danbrockettdrift.com)

POSmiata
08-12-2011, 07:25 PM
Awesome build!

I'm thinking about doing something similar for the radiator support. Can you post some more pics on the mounting points you made for the front end?

xBtony
08-12-2011, 08:03 PM
Wow seriously awesome build. Got some ideas for when I do my swap. Real good work man!

eyehate
08-13-2011, 02:41 AM
Thanks a ton :)

Ill see if I can snap some shots tomorrow of the rad support. Make sure to post your build threads in here so I can check them out :)

POSmiata
08-13-2011, 09:01 AM
Thanks and I will once I get started!

rican_nick
07-12-2012, 02:29 PM
oh man. She's looking better and better.

Do you still have her?