PDA

View Full Version : idle problem


lolatclint
02-01-2009, 09:30 AM
i have a blacktop sr20det. i recently sealed up an exhaust manifold leak but its not as bad as it use to. and when i start my car it idles up to 500 then drops quickly to 0 and dies. but when i start it and give a little throttle it gets going and stays idling low at 500, when im driving and throw it in neutral it drops to 0 and jumps back up to 400-500.

help please :hyper:

Banegraphix
02-01-2009, 09:33 AM
My redtop did something similar and it turned out I had a small vacuum leak on my intake manifold. If not the only other thing i can think of is your IACV is bad or TPS isnt set properly

nismo 240sx
02-01-2009, 12:46 PM
check your ivac system also clean your mass air flow sensor and..if that dont work witch it should fuck with your idle screw a little and set your rpm up a bit

lolatclint
02-01-2009, 01:28 PM
alright thanks guys ill try these out.

esqueue
02-09-2009, 05:09 PM
Updates? There are way too many incomplete threads here. Suck for noobs who are searching such as myself.