Yashio Factory Water Temperature Meter

[BoostedCoupe]

So who has a yashio factory water temp meter? Does it work on a ka? i searched and all i can find is where people ask the question but it never gets answered. What does the temp meter read from? Also does it plug in to the consult plug? i have read where some people say they can only get power from that plug and thats it.

[Dousan_PG]

it works
should plug into the consult

but i prefer the one that u use int eh upper radiator hose

i have one for sale if urlooking for one, new
plugs into upper rad
200 bucks
shipped.

[A Spec Products]

Yeah as far as I know it works on any car

All it does is measure water temperature with the probe

So its not motor or car specific

If you're talking about the Okachan water temp gauge I had one of those

Wired it up like a normal gauge, had the probe in a upper radiator hose fitting

All g

[BoostedCoupe]

Thanks dousan and aspec. Dousan how ackrite do you think it would be if i pluged it in to the consult plug? IF i plug it in and i do not like it can i convert it to the probe type?

[Dousan_PG]

it should be reading the info from the stock water temp sensor infos

[azndoc]

Hey dousan I heard that you like to probe flybert's ass.

[Dousan_PG]

i heard u want me to probe yours
fag!

[azndoc]

Only if your gentle.

[BoostedCoupe]

more info?

[BustedS13]

ackrite

what the shit

[Om1kron]

what the shit

did you forget about dre?

[Brian]

I have one on my KA.

[Om1kron]

I have one on my KA.

do you think your water temp shall sky rocket with the forced induction route you're taking? you know with the hole you cut in the license plate area of the type x bumper? lol

[Brian]

no . .

[Om1kron]

I didn't think so...

[Dousan_PG]

more info?

what more info do u want?
it shows temp
and peak temp
and u can set the peak temp to warn u at

thats all it does.

i used to have one in my car like 3 years ago.

[BoostedCoupe]

I have been told for some reasson on a ka it will not display all the other readings. But the same consult plug type will do it on a sr. Why is that?

[Dousan_PG]

no idea
never used the consult one
here's an idea
dont get that one
get the regular probe type one

[BustedS13]

here's an idea

eBay Motors: AUTOMETER PHANTOM ELECTRIC WATER TEMPERATURE TEMP GAUGE (item 310108788003 end time Jan-12-09 10:12:24 PST) (http://cgi.ebay.com/ebaymotors/AUTOMETER-PHANTOM-ELECTRIC-WATER-TEMPERATURE-TEMP-GAUGE_W0QQcmdZViewItemQQ_trkparmsZ72Q3a1205Q7c66Q3 a2Q7c65Q3a12Q7c39Q3a1Q7c240Q3a1318Q7c301Q3a1Q7c293 Q3a1Q7c294Q3a50QQ_trksidZp3286Q2ec0Q2em14QQhashZit em310108788003QQitemZ310108788003QQptZMotorsQ5fCar Q5fTruckQ5fPartsQ5fAccessories)

http://www.autometer.com/img/products/5731_d.jpg

it's 40 dollars, and it's good enough for nascar
chances are, it's good enough for you

[Dousan_PG]

nascar doesnt use those
they use the high end ones
which cost the same as defis and such

[projectRDM]

So I looked this up to what in hell you're talking about. If it plugs into and reads from the CONSULT, which it appears that it does, it will work on any 91-up Nissan, period. I don't know why you'd think it's engine specific when the CONSULT port is clearly a Nissan mandated port, but whatever. Plug it in and use it. Done.

[BoostedCoupe]

So I looked this up to what in hell you're talking about. If it plugs into and reads from the CONSULT, which it appears that it does, it will work on any 91-up Nissan, period. I don't know why you'd think it's engine specific when the CONSULT port is clearly a Nissan mandated port, but whatever. Plug it in and use it. Done.
Thanks russ. What i was asking about is rather it will read. rev's,speed and all the other things its suppouse to do. I read that for some reasson it will only read them on a sr only. i have no idea why.


Here:http://www.nissansilvia.com/forums/index.php?act=attach&type=post&id=108701
that is the manuel on page 4 it tells you the diffent modes. thats what im asking. Why was i told it wont read all of them on a ka.

[cotbu]

I think some one may have installed it to use as a tach or something on a ka and since they had no functioning tach already, they get no signal. Just a guess. If the ecu sees it then a functioning consult port should dispaly it. I tried to explain it but, whatever! I suck and it's 4:55am

[BustedS13]

nascar doesnt use those
they use the high end ones
which cost the same as defis and such

well you do have me there, i have no idea which autometer line they use

[projectRDM]

Thanks russ. What i was asking about is rather it will read. rev's,speed and all the other things its suppouse to do. I read that for some reasson it will only read them on a sr only. i have no idea why.


Here:http://www.nissansilvia.com/forums/index.php?act=attach&type=post&id=108701
that is the manuel on page 4 it tells you the diffent modes. thats what im asking. Why was i told it wont read all of them on a ka.

Doesn't make a lot of sense, the CONSULT is three wires on all Nissan ECUs, they all transmit data, the unit will have to read any of them the same.

[BoostedCoupe]

Doesn't make a lot of sense, the CONSULT is three wires on all Nissan ECUs, they all transmit data, the unit will have to read any of them the same.
ok cool. ill buy it if it dosent do eveything i want it to ill sale it.