PDA

View Full Version : S13 SE's on 95 S14?

s14zenks
11-12-2008, 01:14 AM
just bought a set of s13 SE rims.. and sadly they cant fit on my 95 s14, the lug pattern is the same but that center circle on the rotor somehow is bigger than the circle on the inside of the rim, so it wont sit flush. i was told its because i have ABS type rotors so what could i do to make it fit?
Bigsyke
11-12-2008, 01:17 AM
maybe a dumb shot in the dark but say a 5mm spacer to clear the lip?
s14zenks
11-12-2008, 01:19 AM
maybe a dumb shot in the dark but say a 5mm spacer to clear the lip?

i was trying to fit it on in the day.. but thanks ill try that
jrocslider
11-12-2008, 01:27 AM
lololololololololololololololololololololololol
inertiaticism
11-12-2008, 01:33 AM
From what I can see, the same part number(s) applies to all 4 lug S14s according to courtesyparts, nothing is noted about ABS.
Perhaps the hub centering ring has a thick layer of rust on it or the wheel centerbores have crap caked in them.
I know they should fit b/c my old car had them.



Also, I just caught that a few posts up. L
murda-c
11-12-2008, 01:33 AM
I didn't even know there was a difference lol.

EDIT:so it appears there isn't. clean up the rust and make sure the wheels are clean.
s14zenks
11-12-2008, 02:04 AM
I didn't even know there was a difference lol.

EDIT:so it appears there isn't. clean up the rust and make sure the wheels are clean.

im sure that its not rust, it has like a black metal ring around that circle on the rotor, so w/o the center cap i can clearly see that its not fitting on right
P_856
11-12-2008, 02:36 AM
can u take it pic of the black metal ring?
murda-c
11-12-2008, 01:22 PM
take the ring off?
WangonwWarrior
11-12-2008, 01:39 PM
HIT IT WITH A HAMMER
DAYUM!!!!!!!!!!!!!!
http://www.geocities.com/b_tannehill/capslock.jpg
LOLZ
DreamN
11-12-2008, 01:46 PM
There should be no difference between the two. IF there is a difference it's more than likely something that has been added on by your or one of the previous owners.
zugoi
11-12-2008, 02:21 PM
could be an aftermarket hub centric ring caked on there.
projectRDM
11-12-2008, 03:42 PM
could be an aftermarket hub centric ring caked on there.

Bingo. Lock thread.
Addicted2Kouki
11-12-2008, 06:45 PM
pics so we can point you in the right direction and laugh at you.

also, 5mm spacer for the front IIRC for it to clear