S13 vs S14 tie rod ends

[N97746]

When swapping an S14 front spindle onto an S13 I know you have to use the S14 LCA balljoint. What about the outer tie rod ends? Will the stock S13 fit? Do they have the right taper? Thanks.

[projectRDM]

Yes.

The S13 tie rod is a smaller diameter but the rod end is the same.

[ho0dlumka13]

yup it will work right now im runnin s14 outer and inner tie rod on my 13

[N97746]

Thanks guys. I'll order a new set and put them on while I'm waiting for the LCA balljoints to get pressed in.

[Brian W.]

if you are going to order new ones anyway you should just get the S14. They are stronger as was said above... they have a larger diameter. You just have to use s14 inners and outters together.