PDA

View Full Version : DFW Shops??


japslapsilvia
09-12-2008, 12:31 PM
anyone know a good shop in the DFW area to do some machining and assembly of my motor?
motor is sr20det, basically looking to get the head cleaned/hot-tanked, mild port-n-polish, machining of head surface, and assembly.

for the block im looking for through cleaning, and inspection of rotating assembly, install new bearing, pistons, rings, pins etc...and decking, w/front cover etc...

and a final assembly of head and block with arp hardware, new headgasket, new freeze plugs etc...

THANKS in advance!!

Schwartzy
09-15-2008, 08:17 PM
if you wanna head over to phoenix with it...there is a bad ass guy did the vq swap in my sentra...his name is travis...website fi-r.net...you can shoot him a pm on myspecv.com or b15sentra.net sn is trav4011...he does afuckingmazing work

drft_n_s13
09-15-2008, 08:35 PM
go to my good man Tay, he had a shop in irving right off of o'connor, he moved to grand prarie though, and he's the best IMO as far as workin on 240s... text me if you want more info 682 553 8343

japslapsilvia
09-16-2008, 12:07 PM
go to my good man Tay, he had a shop in irving right off of o'connor, he moved to grand prarie though, and he's the best IMO as far as workin on 240s... text me if you want more info 682 553 8343

i've heard that name before, but i didnt know he had a shop, does he do machine work as well?

rchan817
09-18-2008, 06:39 PM
he does not do machine work, but pretty much everything else

09-19-2008, 04:45 PM
We are right here in Bridgeport, roughly 45 minutes from downtown Ft Worth.

Regards,
Robert

anyotherone
09-23-2008, 03:21 PM
Automotive Machine in Fort Worth is really good. The built "SpanishRicer's" engine after he dropped a valve due to a cracked valvespring.

I'm using them to overbore and rework my VH45.

I use Watts for B-series, 2jz's and Viper V10's... you might give him a call and see if he has any SR20 experience.