PDA

View Full Version : KA clutch bolt specs?


mike_0678
08-25-2008, 10:30 AM
I'm about to start my auto-manual swap and I seem to have everything but the bolts for the pressure plate to the flywheel. Does anyone know, off hand, what the specs are for these 6 bolts so I can buy some or if they are already on the flexplate? My Exedy kit didn't come with any and I've never heard of where someone would get them.

!Zar!
08-25-2008, 11:48 AM
All those little bolts that hold the clutch onto the flywheel are like 20lbs.

mike_0678
08-25-2008, 11:53 AM
Sorry I should have worded it better. I need the size of them so I can buy them.

let5l1de
08-25-2008, 12:04 PM
I'm about to start my auto-manual swap and I seem to have everything but the bolts for the pressure plate to the flywheel. Does anyone know, off hand, what the specs are for these 6 bolts so I can buy some or if they are already on the flexplate? My Exedy kit didn't come with any and I've never heard of where someone would get them.


i believe you can reuse the torque converter bolts.


PLEASE CONFIRM!

bolt is:
Metric Grade 10.9 fasteners and increase the torque specifications to 30lbs.
8mm x 1.25

8mm (size)
1.25 (thread)
20mm (approx length)

mike_0678
08-25-2008, 01:18 PM
I hope that's the case. I thought they would be reused because I've never heard of anyone making a big deal about finding bolts.