PDA

View Full Version : Front main seal SR anything i need to know


s13dan
08-24-2008, 12:38 AM
Front main seal on redtop SR is there anything i need to know. Im going to replace it and im geussing its pretty strait foward, or is it? With an impact gun and a pulley puller i figure its a walk in the cake. comments? thanx -Dan

singlecamslam
08-24-2008, 12:42 AM
Be careful not to scratch the sides when you're taking the seal out, thats all i can think off.

aNskY
08-24-2008, 09:27 AM
you need a socket thats the same size as the seal so you can hammer it in evenly

GhettoIced-t
08-24-2008, 09:37 AM
I just did mine a few days ago, and you can use the old seal and a rubber mallet to seat the new seal. I saw that used on an install on some 240 site.

s13dan
08-24-2008, 10:43 AM
sweet. I will take my time and do it right, it seems finess is the key.