5 speed swap question

[Jonnyblaze]

so im gonna go pull a 5 speed swap out of a car and i was wondering if anyone had a pic of everything i need to extract.. i know what i need it would just help if i knew EXACTLY what it looks like.. thanks

[ellisonrox]

I guess there aren't pictures, but hopefully this FAQ helps you out

http://zilvia.net/f/archive-faqs/21181-auto-5-speed-swap.html

Good luck!

[driven_]

I guess there aren't pictures, but hopefully this FAQ helps you out

http://zilvia.net/f/archive-faqs/21181-auto-5-speed-swap.html

Good luck!

^what he said, just do it in reverse. lol.

[RevKid]

How To: 5 Speed Swap in Convertibles (and other S13s): 240SX Convertible Forum: Nissan Forums / Infiniti Forums - NICOclub (PICS INSIDE)

(http://forums.nicoclub.com/zerothread?id=77784)

[Vision Garage]

Clutch Pedal, Master cylinder, clutch line. Thats what you need that you can figure out. Then there is the tranny, and everything from the pressure plate to the tranny plate. Dont forget the throw out bearing and clutch fork.

[DaPCWiz]

yer also gonna need an ecu (optional for no CEL), driveshaft, shifter trim, brake pedal (optional), manual pilot bushing (new recommended)

[Jonnyblaze]

Clutch Pedal, Master cylinder, clutch line. Thats what you need that you can figure out. Then there is the tranny, and everything from the pressure plate to the tranny plate. Dont forget the throw out bearing and clutch fork.
i dont need the flywheel?

[drift freaq]

i dont need the flywheel?

If you read the Faq in our faq section it spells out everything needed. If you need pics of these things a FSM or Haynes manual is your friend.

[Vision Garage]

yes you do need the flywheel. Ya do what dave said. Make sure you get al the bolts too.