View Full Version : sr20 parts

07-28-2008, 11:46 PM
i just bought a 1992 s13 and the guy who sold it put on top a sr20 but only the engine exhaust manifold and axles what would i need to complete the swap thanks

07-28-2008, 11:53 PM
You should really search, there's literally dozens of articles that can answer your question. However, what do you mean he put "on top a sr20"???

07-29-2008, 12:49 AM
that he gave me a sr20 that he didnt finish it he only gave me the engine and axles

07-30-2008, 08:22 PM
i just bough a t3 from a guy from here can somebody tell me what to buy i know the basic stuff tranny clutch turbo ecu etc
already have engine
turbo t3

07-30-2008, 08:30 PM
why the hell would you need axles?

07-30-2008, 08:31 PM
axles came with the car

07-30-2008, 08:44 PM
I hope so or you wont be going too far w/o a push

07-30-2008, 09:22 PM
you are not getting it , he gave me the complete car with the stock motor (ka24)and he also gave the sr20 ,manifolds and extra axles

07-30-2008, 09:23 PM
so you have no wiring/transmission etc?

07-30-2008, 09:51 PM
there u go i only have engine axles and manifold oh and the t3 turbo i just bought

07-30-2008, 09:58 PM
i think you should start by atleast reading the sr20det faq, that will get you started on the swap atleast, then worry about that turbo install

07-31-2008, 06:44 PM
I hope so or you wont be going too far w/o a push

+1 rep imma be laughing about that all day.

well lots of the hondas need axles when doing swaps. these nissans are interchangable with the sr20 and are rwd so no axles need to be changed. if you are new to nissans just read alot of peoples build threads and common things to do do your motor when you get it. like gaskets,thermostat,waterpump,oilpump,spark plugs,oil pan, etc. but u need to complete what you have first like get a transmission and wire harness also check for ECU # 62 for redtop ,also do you have a maf? a SOHC maf will work. sounds like you have a little treasure hunt ahead of you post some pics of what you have so we can see exactly what you need. good luck with your project

07-31-2008, 07:04 PM
thanka bro ill pick up the motor today and take pics

07-31-2008, 11:39 PM

07-31-2008, 11:41 PM
and this is the car

08-01-2008, 12:34 AM
Your Better off buying another Complete Engine Swap

Im in the same boat I pick up a long block for $250

I was gonna throw it in the wifes car but after making a list its cheaper to buy a Kit

But needs everything else,

KA Wire Harness $150
SR Wire Harness $350
Wire Service $280
Igniter Chip $220
MAF $175
CAS $300
O2 Sensor $60
TPS $80
SR Transmission $300
Circuit Sport lines $100
Belts $40
Exhaust gasket $30
Starter $225
Fuel Rail $45(Nismo Shop)
Motor Mounts $160
Turbo Locking Tabs $10
Oil Return $12

So far your looking at


And you still need manifolds Intake & exhaust Turbo elbow and few other things

brian m
08-01-2008, 08:19 AM
Yup, sileighty is right. There's always swaps in the marketplace for decent prices.

08-01-2008, 02:32 PM
so who wants to buy my long block

08-02-2008, 02:41 AM
so who wants to buy my long block

Keep it, you'll need it eventually...:faint:

08-02-2008, 02:13 PM
yea hes right you will deffnety need it eventually