wont start, please help

[.jrmyrmx]

im having some troubles right now with my 240 (with sr swap) at the moment it wont start. 2 days ago i did a wire tuck by putting extensions on the injectors, the starter and a few other plugs and the radiator temp sensor. i cleanly soldered and taped up all the wires. after that the car wouldnt start when hot (it would akwardly start after i let it cool down for like 20min). today i replaced the air filter an the oil and it wont start at all. the engine makes the starting noise but never turns over.

thanks,
jeremy

[phatkatsquad]

well dude wat i learned from school is longer the wire the more resistance. and you should check for fuel air and spark you know the usual and if you have all three take look at the ignitor of CAS hope this helps let me know if it does.

[drftthatshit]

why did you have to make the injector wires longer you might be looking at a hole new harness my friend sorry