PDA

View Full Version : Low Impendance RB26 Injectors on SR20?


MeSs
06-10-2008, 10:07 AM
Ive bought a JUN Intake (2015M-N001, 10.5mm) with RB26 Power enterprise 1000cc injectors for my Redtop SR20DET.

And here is the problem, i get fuel to the fuel rail, but not further..
Nothing comes out of the injectors.. Pressure is 4bar.
The injectors are ca2.5-6 ohm. And the original is 11.3-4..

Does anyone know how to get them working? :)

Thanks in advice,
Regards.

louisdaboois
06-10-2008, 10:18 AM
dsm injector resistor box. they convert a high impedence signal from the computer to a low impedence to the injectors.

you can find it in any GST/GSX (eclipse)

MeSs
06-10-2008, 03:21 PM
dsm injector resistor box. they convert a high impedence signal from the computer to a low impedence to the injectors.

you can find it in any GST/GSX (eclipse)
Thanks ALOT, but, there isnt any turbo eclipses in Norway :(

lok
06-10-2008, 04:22 PM
Research "injector driver"

That is really the best way to run "low impedance" injectors.

Also what engine managment are you running?

MeSs
06-10-2008, 10:46 PM
Research "injector driver"

That is really the best way to run "low impedance" injectors.

Also what engine managment are you running?
Apexi PowerFC :)

tanks14
06-15-2008, 12:30 PM
your using the wrong injectors.....whoever told you that rb26 injectors on an sr should get slapped... the only reason i know this is because i know a guy the works for tomei and he told me that it just wont work.....

sirfallsalot243
06-19-2008, 01:25 AM
OBD0 Honda's also have a resistor box. I used one from a 1991 Integra to use low impedance injectors in a car that required high impedance.