PDA

View Full Version : oil issues


KAZA
05-11-2008, 09:34 PM
Hey guy i was working on my car the other day and i was checking my engine oil and the dip stick reads nothing...checked it at least 20 times and nothing. no leaks or anything from to and bottom...i rebuilt the motor during christmas and all o got done was the head and replace the oil pan gasket. compression checkout ok. In the morning theirs blue smoke for a quick second then its gone....and ideas.... i have a KA24de thanks.

Dousan_PG
05-11-2008, 09:41 PM
did u put enough oil in??

KAZA
05-11-2008, 09:55 PM
yea i did this was the second time this happend

Dousan_PG
05-11-2008, 10:00 PM
ah ok haha
maybe yoru engine si burning oil?
does it go into a catch can?

need more info of your setup and what you got going on!
stock ka?

KAZA
05-11-2008, 10:22 PM
ok so i rebuilt motor kinda so wat i did was i replaced the cams and got the head done again but everything is stock except the cams. and i replaced all the motor gaskets and pretty much it. the head was done at the shop. that pretty much it.

orion::S14
05-12-2008, 06:52 AM
From what you're saying, it looks like you put on a new head and some seals, but DID NOT do any bottom end work (no pistons, rings, etc...?)

You can have good compression and bad oil control rings.

My guess - You're probably always burning oil, just slightly.

- Brian