PDA

View Full Version : sr front cover removal


a100pureplayaz
05-04-2008, 02:22 PM
ok im puttin a new chain and guides in lower oil pan is dropped is there any way i can remove the front cover without removing the upper oil pan ?

Sileighty_85
05-04-2008, 04:01 PM
nope you have to remove the upper pan also, cuz the oil pumps pick up will hang up on the upper pan

you can see part of the the pumps pick up hang below the oil pump cover and in to the upper pans area So it either the upper pan or the head, but dont forget about the two bolts inside the valve cover that bolts the head to the oil pump

http://i73.photobucket.com/albums/i235/Neil_85/VFSH1472.jpg

http://i73.photobucket.com/albums/i235/Neil_85/VFSH1473.jpg

a100pureplayaz
05-06-2008, 08:32 PM
thanks so much wound up pulling the motor out lol guess wasnt left with much of a choice since i dropped the chain what rear main seal matches the sr's? the ka or sr's?

a100pureplayaz
05-06-2008, 08:35 PM
also i have a t25 but recentley got a t28 we have the bracket/adapter but can i reuse the stock lines or need new ones?

blownmotor
05-06-2008, 08:54 PM
USDM rear mains work b13/14 sentra se-r's or infiniti g20's all years as for the turbo lines you can but you have to carefully bend them or easier and just buy new braided ones

a100pureplayaz
05-06-2008, 08:58 PM
1991 sentra se-r seal will work correct?

blownmotor
05-06-2008, 09:05 PM
yes buy oe, others will leak

a100pureplayaz
05-06-2008, 09:11 PM
lol work for nissan def will thanks so much the rear tailshaft seal is off a ka though correct?

blownmotor
05-06-2008, 09:13 PM
yea it's the same