bogging issue

[n1smo413]

Well the other day i put on a intake on my car.After i installed it and drove it it would bog whenever i floored it.I checked all the hoses and made sure everything was on correctly.I put my stock intake back on and everything ran fine.So i thought i could just run the cone filter at the end of the maf.I tried that and it would bog again when i floored it.Put the stock air box back in and it ran fine:confused:Anyone know why my car does this?

[landins13]

what motor? if the filter is a wet style, it will clog the maf, you need a dry flow filter or a simple metal mesh filter.

[n1smo413]

is a ka24de.and yes i do have a dry flow filter.I also took a filter off my friends car and it did the same thing

[Big Bronze Rim]

Sounds like a vacuum leak after the MAF. Are you sure there are no leaks or unplugged fittings on the new intake?

[n1smo413]

all the fitting are good.when i take the cone filter out and put the stock airbox back in everything runs fine

[n1smo413]

figured it out.for some reason it was the fuel pump.My car is way faster now to.when i took the old pump out the filter was black.

[Z U L8R]

gj on finding the problem. i rep u for actually attempting to solve your own problem.

gl,
Dave =]

[2,1]

+1

sometimes you just gotta do it yourself.

[leveloneae86]

figured it out.for some reason it was the fuel pump.My car is way faster now to.when i took the old pump out the filter was black.

so u replaced the fuel pump or u just replaced the filter? i never took a fuel pump out so im just curious if its the same problem for me. thanks

[n1smo413]

i replaced the fuel pump.I did the filter to awhile ago with a z32 one but the pump was the actual problem.It took about 15 minutes to replace.

[HS13KLS]

hmm...i might have to do the same..just like everyone else.. +1 rep to you for getting it fixed

[n1smo413]

thanks for the rep.It was well worth fixing.I almost swapped motors.