PDA

View Full Version : Engine is not straight(mount?)PIX!


sr20detconv
03-27-2008, 11:08 AM
Hi just dropped my sr20det in a JDM S13 that was CA18 before.I added nismo mount and now I'm not sure they are on the right side.I putted R on the right(intake) and LN on the left side(exhaust).
Can you help me find out what is wrong?The engine in the picture is fully seated.
http://img.photobucket.com/albums/v607/sr20detconv/Photo146.jpg
http://img.photobucket.com/albums/v607/sr20detconv/Photo148.jpg

Can it be the subframe?

KA-T_240
03-27-2008, 11:26 AM
looks fine to me. The motors in our cars do not sit straigh up and down.

Adam240
03-27-2008, 11:34 AM
That is what I was thinking. Most i have seen lean to the drivers side.

sr20detconv
03-27-2008, 11:35 AM
Thanks!
I always though taht they were perfectly straight.

Anyone else?

OfourTHREEfive
03-27-2008, 11:37 AM
Refer two posts above, its normal.

DirtyS14
03-27-2008, 11:37 AM
Looks a bit crooked, i'll go check mine...

sr20detconv
03-27-2008, 11:41 AM
Looks a bit crooked, i'll go check mine...
thanks alot!

sr20detconv
03-27-2008, 11:54 AM
Iv'e looked at numerous pix and it seems ok.The picture makes it look alot more crooked than it is really.
Thanx

DirtyS14
03-27-2008, 11:58 AM
Hopefully these help you out....

http://img.photobucket.com/albums/v608/amaank/P1010001-1.jpg
http://img.photobucket.com/albums/v608/amaank/P1010002-1.jpg
http://img.photobucket.com/albums/v608/amaank/P1010003-1.jpg
http://img.photobucket.com/albums/v608/amaank/P1010004-1.jpg
http://img.photobucket.com/albums/v608/amaank/P1010005-1.jpg
http://img.photobucket.com/albums/v608/amaank/P1010006.jpg
http://img.photobucket.com/albums/v608/amaank/P1010007.jpg

sr20detconv
03-27-2008, 12:16 PM
thank you!
The engine is ok I think:hs: .
Time to put everything back together!

sbanzer123
03-27-2008, 03:34 PM
looks good 240's rock the gangsta lean.

Nikeboy355
03-27-2008, 03:36 PM
A lot of the Nissan turbo motors lean to the side...

It's normal...