S13 SR running rich

[flip3d]

I just replaced my old rusty gas tank and finally got my SR to start. She idles fine around 800ish but smokes like hell and smells like gas. I'm running stock injectors and FPR, 255 walbro, and T25.

Pulled code 11, which is camshaft pos sensor. So I'm guessing I got the base timing wrong. I just lined the crank up with the second notch on the left and with the dots on the cams. I dont think my timing chain has the different colored guide links. What do you guys think?

Oh, my starter is starting to grind and I get this weird grinding noise when I press the clutch. Should I have gotten a new pilot and throwout bearing when I did the swap?

[duffman1278]

Crank position sensor is different from the Camshaft Position sensor. Unless you mixed up the 2 because I didn't search up that code.

[SoguRacing]

get a fuel pressure regulator. sard or aeromotive

[flip3d]

get a fuel pressure regulator. sard or aeromotive

My FPR is fine. I have a fuel pressure gauge and everything is within spec.

[jskateborders]

check the cts, check for boost/vac leaks, check your maf, check to make sure your getting proper amount of spark from your coils

[flip3d]

Hah. Nevermind. I found the problem. One of my injector O-rings finally gave way.

So new o-rings, new plugs, and im back on the road :)

Code 11 only beacause I was cranking without the CAS plugged in.