PDA

View Full Version : Wheel Fitment or wheel preferance HMMM


na12uto
02-20-2008, 01:56 AM
im sick of my sportmax 962 and i do not have alot of money. I want to go with a wheel That has a low offset since i just finished my silvia widebody coupe and got it painted. i went 30mm in rear and 20mm in front. I am looking for a wheel that will fit flush i have extended studs in right now on four lug with 10mm spacers. I am looking for either something bipp style with a nice lip, or somewhat sport with a good lip and nice offset. What wheels do you out there prefer or see good, oh and the car is white. I am currently looking at sportmax 502 since there price is reasonable, about 500 and are 18x9.5 with a 3.5 inch lip. Another question is will these rub in the front when making a turn, offset is not stated on their website... any and all help will be good, i want flush wheels aaaah, thanks

whiterps13
02-20-2008, 02:11 AM
I feel really bad for you..

Sir
02-20-2008, 02:27 AM
I feel really bad for you..
hahaha
man thats mean.

nevaland9
02-20-2008, 02:32 AM
http://www.elmwoodmagic.com/ama/med/m-portable-flame-thrower.jpg

theres a HUGE selection of flush wheels in the for sale section. theres even a Wheel & Tire sub category so you wont get lost. GL

kdashy
02-20-2008, 02:40 AM
Probably should've went 5 lug before widebody.

adrians_s13
02-20-2008, 02:59 AM
shoulda got wheels before widebody...

whatever happend to making the body accomodate for the wheels, not wheels accomodate for the body :loco:

KA24DESOneThree
02-20-2008, 09:29 AM
whatever happend to making the body accomodate for the wheels, not wheels accomodate for the body :loco:

It's lost on the wagoneers.

Save up for 5-lug and better wheels.

dftsilvia
02-20-2008, 09:37 AM
go 5-lug end your troubles

Slidin240Wayz
02-20-2008, 09:44 AM
im sick of my sportmax 962 and i do not have alot of money. I want to go with a wheel That has a low offset since i just finished my silvia widebody coupe and got it painted. i went 30mm in rear and 20mm in front.

Little money plus large desires don't match.

Did you realize going widebody required larger rims?

Did you take that financial situation into account before you did the work?

Here on zilvia, wow, are a set of rims and the price is great for what you are looking for.

http://www.zilvia.net/f/showthread.php?t=177383

na12uto
02-20-2008, 01:21 PM
ya that wheels was one that i was lookin gat and was curious would a 18x9.5 plus 19 rub in the front when making a turn???

Nismo2Forty
02-27-2008, 10:00 PM
I feel really bad for you..

says the one with ugly ass rotas... :fawkd:

louisdaboois
02-27-2008, 10:07 PM
I feel really bad for you..

HAHAHAHHAHAHAHAHAHAHAHHAHAHAHAHAHAHAHAHAHAHAH jesus christ that was priceless.

khilgers
02-27-2008, 10:19 PM
read this entire thread and if you still have ?'s come back

http://www.zilvia.net/f/showthread.php?t=129865

95KA-Turbo
02-27-2008, 10:21 PM
Talk to Grant in the Advertiser section, under his Up Garage services page, and get these:

http://www.upgarage.com/upgarage/gazou/0711/0711161001897/0711161001897s0.jpg

http://www.upgarage.com/upgarage/stock/stock.php?stocklist_detail=1&data_kubun=2&shouhin_cd=0711161001897&tenpo_id=161

And buy some 25mm spacers.



Otherwise, sell your widebody, and buy some 5 lug hubs, then buy some decent fitting 5 lug wheels and go from there.

motegineon
02-27-2008, 11:18 PM
u could get like the 5lug conversion bolt on spacers things and run a cheaper wheel

azndoc
02-28-2008, 01:46 AM
I have nothing to say, other than I have nothing to say.