HELP!! Throwout Bearing

[SR201AB]

I have a redtop SR20DET with a 5-speed transmission, and when trying to press the old throwout bearing off, the carrier that the throwout bearing is pressed onto broke. I believe it is a cast iron piece but im not sure. Does anyone know where I can get one? or if one off something else will work? Help is much appreciated in advance.

Thanks,
Nate

[JDMwannaBE]

jeez, man thats gonna be a crazy part to come by. sorry, i have no clue.

[unicoladron]

this may help:

http://www.zilvia.net/f/showthread.php?t=98541

this is a long shot, but does anyone know if the KA uses the same tob carrier as the SR? or perhaps even the usdm 300zx?

[fliprayzin240sx]

KA carrier and use a Z32 TOB...

[LimitedEdition]

i was going to say, i would think a KA has the same one as a sr.

i always use 300zx TOB's anyways.

[mestizo]

I used an SR tob carrier on my KA 5 speed swap, it works fine.

[downshift_sideways]

Are you talking about the pivot fork?

( where the throwout bearing is pressed into? )

If so. I have one.

Just to help you out. Pay shipping, and I'll send it via UPS. ASAP.

[ladiesman8527]

http://i44.photobucket.com/albums/f7/JDMDrifter/part.jpg

He needs the part ive circled in red in the picture above. its cracked all to hell. he needs one preferably from an SR20 tranny, but if you guys are saying a KA carrier and a Z32 TOB will work, we'll give it a try. thanks a lot!

PS: im assuming we can still use the SR pivot fork and clips in conjuction with the KA carrier and Z32 TOB right?

[Vernal]

I heard that the ka and sr trannys are pretty much the same except the bell housing.

[koukimonster139]

i heard that if you jump off a 100' tall bridge and into a river you wont die

[downshift_sideways]

I heard that the ka and sr trannys are pretty much the same except the bell housing.
It also depends on what type of clutch you have. they make them smaller or bigger on the Throwout bearing.

I would say:
Go to Napa Auto parts. ( if there is one around you )
Get a KA throwout bearing (35$) it comes with the release sleeve to.

See if that matches. I'm pretty sure it will.

[SR201AB]

Alright I guess ill try the ka carrier with a Z32 throwout bearing, thanks for all the help, I appreciate it!

[opponheimer]

i have like 2 brand new tobs u wanna buy one?

[BattleRoyale]

i had the same thing happen to mine, i just used the ka one it was less worn then the sr one no problems what so ever

[SR201AB]

i wish i would have read this earlier, i just went to nissan and got one today, thanks tho

[fliprayzin240sx]

I still cant believe they cracked a fucking carrier...in all honesty, stay the fuck away from that shop from now on. If thats not a sign of stupidity, i dont know what is.

[SILVIA_KIDs14.5]

I have a redtop SR20DET with a 5-speed transmission, and when trying to press the old throwout bearing off, the carrier that the throwout bearing is pressed onto broke. I believe it is a cast iron piece but im not sure. Does anyone know where I can get one? or if one off something else will work? Help is much appreciated in advance.

Thanks,
Nate
jus use the ka its the same or a get a 300zx same as well all have the same shaft size and number of splines i'm in the process of retrofiting a 300zx tt tranny in the the 240 with my sr

[unicoladron]

^--lol, the thread is over, he already picked one up from nissan