sr20 swap help [PLZ!]

[Borund]

Hey guys im going to be pulling my s14 sr out of the front clip tomorrow morning, and i dont see any hooks or any good secure points to attach the chain for pulling it out. Anybody have any good suggestions? Really appreciate it. Thanks.

-Austin

[rps13drift]

Find a used shitty seat belt or something strong and tie one side to the exhaust manifold and the other side around 2 middle runners on the intake manifold so it looks like an upside down U. Then hook your chains to it lift it and have a blast

[statik]

^^ agreed, i either pull it from the stock exhaust mani/intake mani runners, or i pull it from the head, 2 spots on each side of the head, 2 in front, 2 in the back, using the leveler chains.

[xpl2007]

stock exhaust it will be fine watch everything though so it will not pinch the fuel rail as most do....

[Borund]

Alright cool, thanks alot guys. You're advice helped, now i have an idea of how to get it. :)

[johngriff]

tie the chain around the bracket from the intake mani to the block, and on the other side loop it through the ps hard bracket (not the pump).

[Borund]

Ok great! :)