PDA

View Full Version : rear z32 TT 5 lug conversion S13 possible?

sa3reghatch
10-12-2007, 05:17 PM
Well, I bought what was thought to be N/A Z32 rear 5 lug hubs off ebay. They turned out to be TT hubs. So of course they wont work, axle diameter is too big. Read somewhere you can make them work, but it didnt say how. Any help would be appreciated. Can the hub be taken off and pressed into my old S13 bearing? If not, I have some TT z32 rear hubs for sale if anyone wants them.
UNISA JECS
10-12-2007, 05:54 PM
Nope you cant take the hub off and press it onto your bearings because its bigger all around.

*You need a Z32 TT drivers side axle for driver side 240SX
*You need a G50 Q45 driver side axle for passenger side 240SX.
*You have to modify the input flange where the driveshaft connect to teh diff to acept the 240SX driveshaft bolt pattern.
sa3reghatch
10-12-2007, 05:57 PM
Nope you cant take the hub off and press it onto your bearings because its bigger all around.

*You need a Z32 TT drivers side axle for driver side 240SX
*You need a G50 Q45 driver side axle for passenger side 240SX.
*You have to modify the input flange where the driveshaft connect to teh diff to acept the 240SX driveshaft bolt pattern.


Man fuck that, just gonna get some N/A or S14 ones. Thanks for the help man.
DP_Michelle G
10-15-2007, 12:50 PM
why not just get some from ichiba that would save you the time of searching for a used pair